Chinese researchers from the School of Mechanical and Electronic Engineering at Lingnan Normal University are examining ways to improve the use of microfluidics, outlining their research in the recently published ‘3D Printed Reconfigurable Modular Microfluidic System for Generating Gel Microspheres.’
In this study, the research team developed an interconnected network of microfluidics meant to prevent common challenges—especially limitations for designers in creating more complex systems. Reconfigurable microfluidics are meant to form more integrated systems, allowing for biochemical functions such as:
- Emulsion generation
- Multi-organ chips
- Gradient generation
- Biochemical analysis
“Existing systems often use a monolithic approach, where chemical reactors, sensors, valves, pumps, and detectors are integrated on a single chip,” explain the researchers. ”The typical fabrication methods of monolithic microfluidic systems, which include soft lithography, hot embossing, and femtosecond laser writing, are time consuming and often expensive. Additionally, the complicated fabrication processes would require more attention to the quality control.”
A breakdown within a monolithic system then requires a complete reconstruction of the entire microfluidic system—adding time and expense to a research project. With a modular system, specific parts can be replaced when an issue arises—and they can also be designed and tested separately before integration into the entire system. Modular devices can be constructed quickly—in mere minutes—but they must also be finished with extra bonding and sealing, requiring added time, expense, and expertise.
The modular system specific to this study offers advanced microfluidics with varying geometries. They make up a complex system yet are simple to put together consisting of a screw fastener and an assembly module. Each module is assigned a function, whether it serves as an inlet or an outlet, as a channel, valve, reservoir, or has another purpose.
The researchers designed the 3D model samples (measuring 10 x 10 x 10 mm3) with SolidWorks and then 3D printed them on a ProJet®D3510 SD, using VisiJet® Crystal material (and VisiJet® S300 for waxy support material). After 3D printing, the modules were connected via screw pin connectors.
Surface quality was deemed excellent, and both surface polishing and the use of PDMS coating were ‘very effective.’
Testing also entailed evaluation of the screw fastener through employing an embedded connection, and ‘untightening’ and tightening of the thread. Digital pressure gauges were also used to test for leaks.
“… the method of screw connection was simple and fast,” explained the researchers. “It could be disassembled and reassembled repeatedly to build different functions of novel microfluidic system. It is widely applied in biochemical fields such as fluid mixing and droplet generation. Importantly, the threaded connection provided high fluid pressure, avoiding fluid leakage problems, and expanding its application.”
The range of sample modules were all connected with the screw fastener, and ultimately because of the ease in assembly, the researchers stated that this system would be suitable for non-expert users.
“Furthermore, the integrated microfluidic device was also applied as multi-analyte mixing and multi-emulsion generation. This modular microfluidic system has a tremendous potential for realizing mass-production complexes and multiplex systems for the commercialization of the microfluidic platform,” concluded the researchers.
Microfluidics continue to be a source of research and study for scientists today, in work with organ-on-chips, integration with sensors, and with projects requiring miniaturization. What do you think of this news? Let us know your thoughts; join the discussion of this and other 3D printing topics at 3DPrintBoard.com.
[Source / Images: ‘3D Printed Reconfigurable Modular Microfluidic System for Generating Gel Microspheres’]Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
Model No. Deploys Titan Pellet 3D Printers for Sustainable Furniture Production
Over the years, many designers have tried to create 3D printed polymer furniture. Early pioneers like Janne Kyttanen, Materialise’s MGX, and Joris Laarman have led the way with 3D printed...
3D Printing News Unpeeled: Recycling PLA, More Efficient Atomizing
Filamentive hopes to recycle your PLA if you’re in the UK and order over £500 worth of filament. Their partner 3D Printing Waste (3DPW) will turn the PLA into injection...
Lighting the Way with Potato Starch: Sustainable Polish ECO Lamps Use 3D Printing
Lighting that meets the essence of nature: this is the reality brought to life by ECO Lamps, which introduces a fresh perspective to sustainable lighting design using potato starch. These...
3D Printing News Unpeeled: 3D Printed Construction Standard, Sand Wall & Self Heating Microfluidics
ISO/ASTM Standard 52939:2023 has been released and it sets standards for QA for 3D Printed polymer, composite and cement buildings. This is most welcome since 3D printed construction is a...