Chinese Unveil Mysterious 3D Printed Houses – Built Out of Unique Material, Able to Withstand Devastating Earthquakes

IMTS

Share this Article

villafeaturedIn the past, we’ve covered many unique uses of 3D printing being utilized in China. Whether it is the 3D printing of titanium medical implants, the creation of large scale 3D printed aircraft parts, or entire houses and apartment buildings fabricated through the use of 3D printers, the country certainly believes that this technology is the future of manufacturing. While we’ve reported on a company called WinSun in the past, who has developed a method of 3D printing large buildings, apparently they aren’t the only Chinese company trying to do this.

villa2A company called Zhuoda Group has developed a very unique form of 3D printing buildings, so unique that not only have they applied for over 22 patents for the technology, but they also are reluctant to divulge the exact process. Unlike other forms of 3D printing of large structures, which use a cement base for construction, Zhuoda does not. In fact, the material that they use is being called a “secret”, although they have many parties interested in purchasing it.

The buildings that they are fabricating are strong enough to withstand 9.0 magnitude earthquakes, stand up to harsh weather, and provide for superior insulation. Better yet, the material that these houses are constructed with also generates negative ions on a permanent basis, a feature that many Chinese will be quite happy with. On top this, the buildings are also fireproof, waterproof, and virtually corrosion-proof.

villa3

The houses are built from individual 3D printed modules, 90% of which are all fabricated in a factory setting and then transported to the construction site. Because of this, very little information regarding the exact techniques being used for their creation have been revealed.  However, this morning in China reporters gathered to witness the construction of a 2-story villa being built with 6 of these 3D printed modules, each weighing approximately 100kg (220 pounds) per square meter. Using cranes, the individual modules, consisting of a living room, bedroom, kitchen, bathroom, and more, were all lifted and stacked on top of each other, resulting in a fully constructed home. The process took just 3 hours to complete, upon which the public and the media were permitted inside.

Testing has shown that these buildings can withstand average wear and tear for at least 150 years in virtually any environment here on earth. The company says that a typical 500 square meter villa could completely be constructed in just 15 days time.

villa17

As you can see in the photos, obviously these modules are not entirely 3D printed.  Various forms of decor are available, such as wood, marble and jade, to meet the requirements of individual tastes. The technology is able to be used to fabricate both interior and exterior walls, as well as decorative elements within a home.

While very little information was divulged on the process, it should be interesting to follow Zhuoda Group as they continue to construct more of these homes. What do you think about this unique construction method? Discuss in the Mysterious 3D Printed Chinese Homes forum thread on 3DPB.com. Be sure to check out some additional photos below.

Share this Article


Recent News

Liquid Metal 3D Printing Sector Emerges with Fluent Metal’s $5.5M Investment

3DPOD Episode 191: Amy Alexander, 3D Printing at the Mayo Clinic



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

3DPOD Episode 190: Generative Design for 3D Printing with Novineer CEO Ali Tamijani

Ali Tamijani, a professor in the Department of Aerospace Engineering at Embry-Riddle Aeronautical University, has an extensive background in composites, tool pathing, and the development of functional 3D printed parts,...

Featured

3DPOD Episode 189: AMUG President Shannon VanDeren

Shannon VanDeren is a consultant in the 3D printing industry, focusing on implementation and integration for her company, Layered Manufacturing and Consulting. For nearly ten years, she has been involved...

3DPOD Episode 188: Clare Difazio of E3D – Growing the Industry, and Growing With the Industry

Clare DiFazio’s journey into the 3D printing industry was serendipitous, yet her involvement at critical moments has significantly influenced the sector. Her position as Head of Marketing & Product Strategy...

Featured

Printing Money Episode 15: 3D Printing Markets & Deals, with AM Research and AMPOWER

Printing Money returns with Episode 15! This month, NewCap Partners‘ Danny Piper is joined by Scott Dunham, Executive Vice President of Research at Additive Manufacturing (AM) Research, and Matthias Schmidt-Lehr,...