MakerBot CEO Expresses Optimism for Company’s Future and Hints at a Major Project in the Works

IMTS

Share this Article

MakerBot-LogoIt’s been a rough year for MakerBot, with layoffs and store closures, as well as disappointing third quarter results, causing quite a bit of whispering within the industry. CEO Jonathan Jaglom isn’t worried, though. Jaglom, who took over the company in March, has been busy restructuring MakerBot and redefining the company’s priorities in an attempt to make the organization much stronger going into 2016. Jaglom is optimistic about the future, and, in a recent interview with the New York Business Journal, he spoke about MakerBot’s upcoming goals, including a mysterious networking project.

In fairness to MakerBot, they aren’t the only company that suffered in 2015. It’s been a disappointing year for the 3D printing industry overall, which Jaglom attributes to unrealistic expectations.

“There is, I think it’s fair to say, a de-hype of the 3d printing industry as a whole, which was in its peak last year and that has impacted everyone, including MakerBot,” he said. “In that space, I think expectations were not set in the time frames that were expected. I think people were expecting a consumer market to be ripe earlier than I believe reality would suggest.”

jaglom-corrected-mdc-750xx5184-2922-0-513

[Photo: Michael del Castillo, New York Business Journal]

The layoffs, while unfortunate, were necessary for MakerBot to adjust and refocus on its strengths, he continued, at the expense of some of its less successful endeavors. One of those less successful endeavors is the MakerBot Digital Store, which hasn’t caught on the way the company thought it would. While it’s not going anywhere, “we deem it not core to our activities” at this time, said Jaglom. Instead, MakerBot has shifted their focus to improving their firmware and desktop software.

MG_0220_700x467Part of the staff reorganization that Jaglom undertook was for the purpose of creating more local management teams for MakerBot’s global divisions, rather than continuing to manage them from a distance. Such restructuring ensures that each division has a management team that is aware of and invested in the details of its operations. Quality assurance has also been given a serious boost in staffing, which should come as a relief to consumers plagued by printer issues.

Educational outreach will remain a priority for MakerBot as well. The company has been one of the most active and visible in terms of getting 3D printers into schools and making sure educational 3D printing programs are firmly established in as many schools as possible. When speaking about MakerBot’s future plans in this regard, Jaglom got a bit cryptic, hinting at an upcoming project that would utilize Thingiverse and its networking capabilities to link educators in some sort of Internet of Things-like system.

thingiverse-logo“We have printers in over 5,000 schools and we’re giving those teachers accessibility through Thingiverse to learn best practices from one another to help them in their courses,” said Jaglom. “Down the road the whole education and Makerbot equation will be a lot more tied up. Imagine if we could let teachers communicate with one another. A teacher in Australia doing a fourth-grade math class using a Makerbot and then streaming that through our means of communication…and someone here in New York City also teaching fourth grade math could use that best practice. But we’re not just talking about two teachers, we’re talking about half-a-million active users at Thingiverse—that’s the population today. If you can tie all of that together and create an experience that is seamless and easy to use, just think of the immensity, the power of that.”

No further details were offered, but a networking project on the scale described by Jaglom could be groundbreaking. If MakerBot has become something of a poster child for the issues that have been affecting the 3D printing industry as a whole over the past year, Jaglom’s optimism about the future should be reassuring to everyone.  Discuss this story in the Jaglom 3D Printing forum thread on 3DPB.com.

 

Share this Article


Recent News

Will There Be a Desktop Manufacturing Revolution outside of 3D Printing?

Know Your Würth: CEO AJ Strandquist on How Würth Additive Can Change 3D Printing



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

Pressing Refresh: What CEO Brad Kreger and Velo3D Have Learned About Running a 3D Printing Company

To whatever extent a business is successful thanks to specialization, businesses will nonetheless always be holistic entities. A company isn’t a bunch of compartments that all happen to share the...

Würth Additive Launches Digital Inventory Services Platform Driven by 3D Printing

Last week, at the Additive Manufacturing Users’ Group (AMUG) Conference in Chicago (March 10-14), Würth Additive Group (WAG) launched its new inventory management platform, Digital Inventory Services (DIS). WAG is...

Featured

Hypersonic Heats Up: CEO Joe Laurienti on the Success of Ursa Major’s 3D Printed Engine

“It’s only been about 24 hours now, so I’m still digesting it,” Joe Laurienti said. But even via Zoom, it was easy to notice that the CEO was satisfied. The...

Featured

3D Printing’s Next Generation of Leadership: A Conversation with Additive Minds’ Dr. Gregory Hayes

It’s easy to forget sometimes that social media isn’t reality. So, at the end of 2023, when a burst of doom and gloom started to spread across the Western world’s...