LightBug Solar Powered GPS Tracker with 3D Printed Case Takes Flight on Kickstarter

RAPID

Share this Article

bike

When it comes to getting a product to market, the cost of tooling for injection molded plastic parts can be a real setback. 3D printing has been especially useful to helping inventors getting their devices from the drawing board to functional prototypes and sometimes even final products. The advent of crowdfunding has also enabled all sorts of unique and innovative products find the initial investment they so desperately need. One product that might not have seen the light of day without both 3D printing and Kickstarter is the LightBug, and hopefully they will be able to meet their funding goals.

parts

The guts

The LightBug is the brainchild of UK-based father and son team, David and Chris Guest. They have been designing and manufacturing GPS tracking devices since 2006. The LightBug is a tiny GPS tag that can be used for everything from fitness tracking to taking care of Alzheimer’s patients. It is solar powered and smaller than a half pack of chewing gum.

They expect that due to its small size, solar charging, and ease of use it will appeal to parents, pet lovers, fitness enthusiasts, and the plain forgetful. LightBug prototypes are 3D printed and through their recently launched Kickstarter they are looking for funding the expensive tooling process required for injection molding.

3D printed case.

LightBug 3D printed case

The LightBug is intuitive and easy to use. Users simply attach LightBug to whatever they need to track and use the phone app to both configure alerts and locate it. Alerts can be set up for a wide range of things, such as proximity to the user’s phone. Proximity alerts detect if the device is no longer nearby (using Bluetooth) and will trigger automatic position updates. Alternatively, the user can draw areas on a map that are either “safe zones” or “danger zones” and receive notifications when boundaries are crossed. Other notification triggers include time of day, detection of falls, and speed.

LightBug knows where it is thanks to GPS satellites, with an accuracy of 50cm (1.6ft). It sends its location over the mobile phone network to the app and works anywhere in the world. The battery never needs charging as it has two tiny solar panels capable of charging the built-in battery, even indoors.dimensions

“We’ve squashed a mobile phone, low energy Bluetooth chip and high quality GPS antenna into a package smaller than most car key fobs,” says Chris. “David and I have been working on trackers for 8 years now, and we’re proud to present our best work yet: a device significantly smaller and more feature packed than anything out there already.”

dogsThe LightBug team is looking to raise £50,000 (about $77,782 USD) via Kickstarter to produce the first batch of devices. As of the time of this writing, they had already sold out their Super Early Bird and Early Bird rewards–and has already raised $36,154. Among the current available reward tiers, backers can get a standard LightBug with a 1 year data plan for £87 ($135), and a LightBug Plus (which adds Bluetooth) with 2 years of data for £97 ($151). The campaign runs through September 15th.

I think this a device that could potentially save lives and will certainly give more piece of mind to parents and caregivers.

Will you be backing the LightBug campaign? Join the conversation in the 3D Printed LightBug Device forum thread at 3DPB.com. Check out more images from the company showing some uses and specs for the LightBug:

drone

droppedkeys

lightbug-on-child

app explanation

proxsequence

sequence2fps

hires-how

how-short

Share this Article


Recent News

New AM Research Market Brief: China to See $6B in 3D Printing Hardware Sales by 2032

3D Printing Financials: IperionX Aims for Mid-2024 Titanium Powder Production Amid Stock Downturn



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Titanium Powder Supplier IperionX Completes HAMR Furnace Installation at Virginia Campus

IperionX, the Charlotte-based manufacturer and supplier of US-sourced titanium products, has installed the Hydrogen Assisted Metallothermic Reduction (HAMR) furnace at its Titanium Manufacturing Campus in South Boston, Virginia. The company...

3D Printing Webinar and Event Roundup: April 28, 2024

In this week’s 3D Printing Webinar and Event Roundup, the Ceramics Expo is taking place in Michigan, Stratasys continues its advanced training courses, and SPE is holding a Polymer Characterization...

IperionX Inks 10-Year Deal with Wisconsin Manufacturer for 80 Metric Tons of Titanium Per Year

IperionX, the Charlotte-based supplier of sustainable titanium powders used for additive manufacturing (AM) and metal injection molding (MIM), has signed a ten-year deal with United Stars, a group of industrial...

IperionX Receives Interest from US Federal Bank EXIM for Titanium 3D Printing Powder

Titanium, a metal prized for its strength, corrosion resistance, and high-temperature resilience, has traditionally had complex and carbon-intensive supply chains. Enter IperionX (Nasdaq: IPX), an American company aiming to bring...