Christopher Barry is the founder, CEO and chief designer of Earborg, what he calls “a new way to listen and interact with the world in a compact, modular and extensible, secure and open, wearable audio platform designed to put the user fully in control.”
As part of his work, he uses state-of-the-art rapid prototyping tools like the Form1+ SLA 3D printer and the NextEngine UltraHD 3D Scanner to develop his product, and he was a bit too impatient to wait for his parts to clean using the standard method recommended by formlabs.
“I built this a while back from a couple of loaf pans, a Makita palm sander and some 2-part expanding urethane foam, separating the foam chunks with saran wrap when casting,” Barry writes. “I drive it with a router speed control. Totally kicks ass and cleans the part completely in a couple minutes.”
Barry says his homemade device comes into play after a quick rinse of the parts in the static IPA container. He then drops the part in what he calls the ‘Loafinator,’ and voila! Clean parts in just a couple of minutes. Barry then dries the parts off with his air compressor and tosses them in the UV box for final finishing.
Barry’s probably not the only one to find the Form 1+ 3D printer post-print cleaning step more than a touch dull. It involves placing parts in a alcohol bath for some 20 minutes. But have no fear. The Loafinator cuts bath time from 20 minutes down to around two.
He made his device with a palm sander, urethane expanding foam and a pair of bread loaf pans.
Others have suggested that a fine stream of bubbles generated by “air stones” used in reef skimmers might speed up the process as well.
Of course, some others pointed out that using MadeSolid resin cuts the bath time down to just a couple minutes, so there’s that… This device might also work well to remove soluble support material, and in fact, Stratasys and 3D Systems already use a similar ultrasonic method.
Can you see yourself building your own version of the Loafinator? Let us know in the Loafinator forum thread on 3DPB.com.
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
Printing Money Episode 18: The DC Fly-In with Mark Burnham, AddMfgCoalition
It’s only been a week since the previous show, but Printing Money is back already with Episode 18. Certain events call for Printing Money’s coverage, and the recent 2nd Annual...
Aerospace OEM Invests $9.1M in Michigan for Metal 3D Printing and More
Barron Industries, a foundry based in Michigan specializing in serving the aerospace and defense sectors, has made a $9.1 million capital investment to expand its operations in Oxford, Michigan. The...
Can Higher Power Density Engines Lead to Broader 3D Printing Use?
Traditionally, when it comes to sports cars, interest has centered around metrics such as horsepower per cubic inch and power-to-weight ratios. These metrics are calculated and interpreted differently by various...
Wisconsin’s Evology Adds Digital Sheet Forming to Service Roster
Evology, a service bureau based in Wisconsin and specializing in serving strategic sectors like aerospace and defense, has added digital sheet forming (DSF) to its repertoire of manufacturing capabilities. Evology...