ISS Looks for Experiments for Tissue Engineering and Bioprinting in Orbit

RAPID

Share this Article

Responsible for the U.S. portion of the International Space Station (ISS), the ISS National Laboratory sends payloads to space, both from commercial firms and academic institutions. Now, the ISS National Laboratory wants to undertake a series of experiments that will be of benefit to both future space explorers and everyone who stays behind. The lab is looking to bioprint tissues in Low Earth Orbit (LEO) for the purpose of pursuing new discoveries as well as making viable in-space fabrication.

The BFF

Bioprinting and regenerative medicine are areas of interest for space researchers, in particular because it is believed that tissue engineering and stem cell research can benefit from the effects of microgravity. An example mentioned by the ISS National Laboratory is a project by Emory University to grow heart cells. Redwire Space’s Biofabrication facility (BFF) will be available for these projects but experiments could also be held using other equipment on board. If you would like to participate, then a Concept Summary is due by November 29th, so get cracking on that.

Smiling space man with BFF

Stations in Space

The ISS was and continues to be a frightfully expensive project, with a $150 billion cost to initially build with running costs of around $4 billion a year. LEO space stations bring a lot of efficiencies for space travel and exploitation, however. Serving like oases in space, they could be used to repair, launch, and upgrade satellites. They could also serve as locations to distribute and convey cargo and people to other points in space. Primarily, space stations can be used to stage further space exploration missions. They could also project power and serve as crucial forts in any future space-based confrontations.

However, we have over 4,500 satellites in orbit but just two space stations at the moment. The ISS and the Chinese Tiangong station are some of the most complex endeavors that we humans are engaged in. If commercial or more extensive government space stations are to become a reality, something will have to change.

The most obvious possibility is to eliminate the human element. A space station without people will be much smaller, more compact, and efficient. It wouldn’t need all of the oxygen, water, food and waste management, storage and disposal that we need now to keep the astronauts alive. It also wouldn’t need a lot of empty space for astronauts to wave to school kids. Clearly, this may be the best option: a no-people-involved space station.

Humans have never been a very rational species, though, and the people part of space flight is what keeps the headlines coming, so a robotic space station probably not happen. Barring this, significant investor money will have to go to the development of these stations and they will have to commercially exploit them. Commercial space stations are potentially very lucrative, like boom towns adjacent to railway stations in the old West. Nanoracks’ Starlab station is an attempt at doing just that. However, the investment will be obscene and the patience and fortitude will have to be formidable.

The National Lab is looking now to change the economics of space stations. How many 3D printed hearts will keep the ISS flying? Besides the fact that the new project is a very cool one, it could also be very useful. Microgravity changes many things, stem cells grow faster in space, alongside higher quality optical fiber that Redwire also creates. The ISS affords humanity an opportunity to carry out long-term experiments in a unique location. That special place could be used to test items for their use in space, such as the Additive Manufacturing Facility 3D printer on board, which could make spare parts for future missions, or the metal printer that will find its way to ISS next year.

Additionally, there could also be research with very beneficial effects for those here on earth. For example, the ISS has been used to test solar panels while the environment is perfect for studying semiconductors more precisely. If these stations could be used to grow better hearts, then perhaps they could be financially solvent and we could have platforms in space that pay for themselves while advancing space exploration.

Share this Article


Recent News

3D Printing News Briefs, May 18, 2024: Sustainability, Mass Spectrometry, & More

3D Printing Financials: Velo3D Sees Better Q1 2024 After Difficult Last Quarter



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Printing Money Episode 17: Recent 3D Printing Deals, with Alex Kingsbury

Printing Money is back with Episode 17!  Our host, NewCap Partners‘ Danny Piper, is joined by Alex Kingsbury for this episode, so you can prepare yourself for smart coverage laced...

Featured

Insights from Cantor Fitzgerald on AM’s Q1 2024 Landscape

A recent survey by Cantor Fitzgerald sheds light on the persistent challenges within the additive manufacturing (AM) industry in the first quarter of 2024. Based on responses from 38 industry...

3D Printing Financials: Xometry’s Scaling up and Strong Start to 2024

Xometry (Nasdaq: XMTR) kicked off 2024 with strong results, boosting its marketplace and technology to new heights. Both revenue and gross margin soared, fueled by an expanding global network of...

3D Printing Financials: Desktop Metal Targets Recovery Amid Net Losses and Revenue Downturn

Despite facing a decline in revenue and the persistent challenges of a tight economic climate, Desktop Metal (NYSE: DM) is making strides toward operational efficiency. The first quarter of 2024...