3D Printing in the Fight Against COVID-19 “The Citizen Supply Chain’’

IMTS

Share this Article

UK researchers from Queen’s University Belfast are focused on how 3D printing can assist in serious healthcare issues, releasing the findings of their latest study in the recently published ‘Additive Manufacturing Can Assist in the Fight Against COVID-19 and Other Pandemics and Impact on the Global Supply Chain.’

No one was prepared for a pandemic that would shut down much of the world for months, not to mention what would also grow into further horror as devices like ventilators and protection for medical professionals were in short demand globally. Resourceful students and makers took to their 3D printers quickly, offering items like face shields and masks, as well as open-source ventilators. For this study, the researchers delved further into the effects on the supply chain, as well as the potential outcome for patients, studying the ‘unprecedented situation’ of a community coming together to begin providing much-needed personal protective equipment (PPE).

Fused deposition modeling 3DP process of a face shield. 3DP, three-dimensional printing. Fused deposition modeling 3DP process of a face shield. 3DP, three-dimensional printing.

“The ‘maker’ or ‘citizen supply chain’ community across the world, with collaborators from industrial and academic institutions, organized and established enormous networks in a short period, to distribute 3D-printed items to health care professionals,” stated the researchers.

“This initiative is the biggest “collaborative project” in the modern history following the spirit of the “RepRap2” initial project.”

It is clearly true also, that 3D printing has been in the headlines almost daily, in association with the creation of medical devices and peripheral parts for hospitals and patients in dire need.

Examples of 3D printed face shield and door openers prepared by the School of Pharmacy Queen’s University Belfast, donated to health care professionals. The face shields were made of a 3D printed part (gray/orange part), an acetate sheet as visor, an elastic band, and foam to protect the forehead. These designs were approved by the infection control unit of the Belfast Health & Social Care Trust.

As we have covered at 3DPrint.com also, the question of materials and what is safe for use must continue to be examined:

“It is very important to emphasize that not all 3DP items that have been reported are appropriate to be used in COVID-19 health centers before getting approval by a regulatory body (e.g., U.S. Food and Drug Administration [FDA]), as they have to provide a certain degree of protection to these health care professionals and/or have to be safe for the patients (e.g., use of valves and ventilators).

Surgical masks and N95 respirators have been in demand worldwide also, creating much controversy as governments have been criticized for not backing faster production or distribution of such items when they are so badly needed. Manufacturers are focused on producing them, but such items are also highly regulated; because of that, 3D printed items may not be safe in terms of giving enough protection against fluids and potential germs. Copper and a variety of composites that may be able to offer antimicrobial properties within 3D printed materials are being examined for use.

‘Printing farms’ are becoming more common too, as large 3D printing companies offer facilities to assist in keeping up with the need for medical devices, focusing on FDM 3D printing, SLS, and SLA. Companies such as Volkswagen, Ferrari, and BMW have also been using their manufacturing sites for 3D printed medical products.

“All these examples have shown that 3DP is nowadays an emergent valuable technology to support in a pandemic and boost supply chain. Very soon, every hospital will have a 3DP department that will be responsible for manufacturing bespoke items in-house,” concluded the researchers.

“The “citizen supply chain” has proven to be a strong initiative/solution to unlock the potential of 3DP in future supply chains and be a game changer in many industrial sectors. However, it is very important that all safety considerations/regulations are to be followed when a 3DP item is proposed to be used in a hospital environment as not all designs or/and materials used can provide an appropriate physical barrier.”

What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.

3D Printed Examples, Reported in the News, in the Fight Against COVID-19

[Source / Images: ‘Additive Manufacturing Can Assist in the Fight Against COVID-19 and Other Pandemics and Impact on the Global Supply Chain’]

 

Share this Article


Recent News

Will There Be a Desktop Manufacturing Revolution outside of 3D Printing?

Know Your Würth: CEO AJ Strandquist on How Würth Additive Can Change 3D Printing



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

Pressing Refresh: What CEO Brad Kreger and Velo3D Have Learned About Running a 3D Printing Company

To whatever extent a business is successful thanks to specialization, businesses will nonetheless always be holistic entities. A company isn’t a bunch of compartments that all happen to share the...

Würth Additive Launches Digital Inventory Services Platform Driven by 3D Printing

Last week, at the Additive Manufacturing Users’ Group (AMUG) Conference in Chicago (March 10-14), Würth Additive Group (WAG) launched its new inventory management platform, Digital Inventory Services (DIS). WAG is...

Featured

Hypersonic Heats Up: CEO Joe Laurienti on the Success of Ursa Major’s 3D Printed Engine

“It’s only been about 24 hours now, so I’m still digesting it,” Joe Laurienti said. But even via Zoom, it was easy to notice that the CEO was satisfied. The...

Featured

3D Printing’s Next Generation of Leadership: A Conversation with Additive Minds’ Dr. Gregory Hayes

It’s easy to forget sometimes that social media isn’t reality. So, at the end of 2023, when a burst of doom and gloom started to spread across the Western world’s...