A group of international authors delve further into bioprinting and the structures that make it possible to keep cells alive during tissue engineering, releasing their findings in the recently published ‘Complexation-induced resolution enhancement of 3D-printed hydrogel constructs.’ In this study, the research team focuses on post-printing treatment of hydrogel constructs, immersing them in a solvent meant to transform dimensions via a unique shrinking method.
3D printing is impacting the medical field in many ways, and bioprinting, tissue engineering, and fabrication of a variety of bioinks and scaffolding structures are a source of fascination around the globe as we wait for the ultimate—true 3D printed human organs that may eventually change the face of medicine, and do away with waiting lists one day for patients in dire need. The authors of this latest research point out that while 3D printing and bioprinting have allowed for huge strides, limitations remain:
“ … existing printing strategies all have their minimally producible resolutions, which are factors of multiplexed parameters, such as the printer hardware and ink properties. For example, in extrusion printing using hydrogels as inks, the resolutions are typically sub-millimeter for the dispensed microfibers,” explain the researchers.
“The same holds true for microfluidic coaxial printing, where the diameters of the created hollow microfibers usually fall in the range of a couple hundred micrometers or larger. Although some other printing strategies, such as those based on light (e.g., two-photon lithography) can achieve varying degrees of higher resolutions, their instrumentation is usually complicated limiting the broader adoption for general use.”
Much research has been devoted to refining inks and hardware for better performance; however, the authors point out that much of the progress so far has been ‘impractical for some applications.’ Other proposed methods for improving hydrogels via shrinkage technology have fallen somewhat flat too.
Shrinking printing, also known as complexation-induced resolution enhancement in 3D printing, offers improved resolution—without the need to transform printers or ink. The research team used anionic inks like used hyaluronic acid methacrylate (HAMA), gelatin methacryloyl (GelMA), and alginate.
“Following standard printing procedures, we subject the HAMA-, GelMA-, or alginate-based hydrogel constructs to immersion in a polycationic chitosan solution,” explained the researchers. “Through charge complexation and subsequent expulsion of water from the gels, these printed constructs are found to reduce in their linear dimensions in various degrees.”
Proof-of-concept was performed via:
- Direct extrusion printing
- Sacrificial printing
- Microfluidic hollow fiber printing
The researchers also demonstrated versatility of this technique in using polyanionic alginate to shrink polycationic chitosan-based hydrogel constructs, along with showing success in keeping cells alive within the bioprinted hydrogels.
Sample cylindrical HAMA hydrogels were fabricated for the study, with comparisons noted before and after chitosan shrinkage.
“Although the concentrations of HAMA in the shrunken hydrogels were much higher than those of the initial constructs, water was still the main constituent maintaining their hydrogel nature for various relevant applications,” explained the authors.
“Notably, our data showed that these printed constructs could reduce in their sizes by different degrees, comparing to their original dimensions. In addition, results indicated that this method is broadly applicable, i.e., a printed anionic hydrogel structure might be shrunken by a cationic polymer, or vice versa,” concluded the researchers. “We finally demonstrated that successive shrinking could preserve, in a cell type-dependent manner, the viability of cells embedded in the printed hydrogel matrices compared to a single, longer shrinking procedure, revealing the potential applications of our shrinking printing method towards tissue biofabrication.
“We therefore anticipate widespread adoption of our unique technology in future printing of hydrogel constructs for various application areas with further optimizations.”
What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.
[Source / Images: ‘Complexation-induced resolution enhancement of 3D-printed hydrogel constructs’]Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
Printing Money Episode 17: Recent 3D Printing Deals, with Alex Kingsbury
Printing Money is back with Episode 17! Our host, NewCap Partners‘ Danny Piper, is joined by Alex Kingsbury for this episode, so you can prepare yourself for smart coverage laced...
Insights from Cantor Fitzgerald on AM’s Q1 2024 Landscape
A recent survey by Cantor Fitzgerald sheds light on the persistent challenges within the additive manufacturing (AM) industry in the first quarter of 2024. Based on responses from 38 industry...
3D Printing Financials: Xometry’s Scaling up and Strong Start to 2024
Xometry (Nasdaq: XMTR) kicked off 2024 with strong results, boosting its marketplace and technology to new heights. Both revenue and gross margin soared, fueled by an expanding global network of...
3D Printing Financials: Desktop Metal Targets Recovery Amid Net Losses and Revenue Downturn
Despite facing a decline in revenue and the persistent challenges of a tight economic climate, Desktop Metal (NYSE: DM) is making strides toward operational efficiency. The first quarter of 2024...