South Korea: 3D Printed Myolectric Hand Orthotics Improve Hand Function for Spinal Cord Injury Patients
In the recently published ‘Development of 3D-printed myoelectric hand orthosis for patients with spinal cord injury,’ South Korean researchers propose the design for an innovative new wearable medical device meant to assist spinal cord injury patients in achieving greater hand function.
While researchers and manufacturers around the world have engineered numerous orthotics and prosthetics—from those meant for the ankle and feet to the hands and arms—the researchers point out the motivation behind their study as so few upper extremity orthoses have been created for successful functionality in patients. Previous research has focused on materials and strength but not actual affordability and ease in ease for patients.
The orthosis created for this study functions via customized electromyography (EMG) signals which send input to the controller, all of which can intuitively understand user intention for patients with cervical SCI. The team designed the parts in SolidWorks, and then they were 3D printed on a Moment2, using PLA. The device costs around $230 to make, and that is supposed to decrease further in the future.
The orthosis is made up of the forearm cuff, hand, and finger ring parts. The cuff is also comprised of a dorsal and volar forearm splint, featuring a linear motor controlling the wrist extension.
“When the wrist is extended by the linear motor, the nylon thread tightens, which strengthens the tenodesis grip. Thus, wrist extension leads to the simultaneous flexion of the interphalangeal and metacarpophalangeal joints of each finger including thumb,” state the researchers.
Users can grasp objects when the motor is activated—emphasizing one of the main features that sets this device apart as more people can use the device—especially patients with more severe SCI and lack of wrist control.
The researchers employed an Arduino microcontroller board with a small control unit meant for portability at 10 cm × 5.3 cm × 1.7 cm and 81 g.
Ten patients with chronic cervical SCI—nine men and one woman all in the 31- to 65-year-old range—participated in the study from March 27th, 2019 to April 31st, 2019.
Overall, as the researchers worked with the participants, they found that the orthosis was able to ‘significantly improve’ hand function for people for cervical SCI, and they received good feedback regarding usability of the device. The researchers also expect even better results as the individuals participating continue to adapt to the system.
[Source / Images: ‘Development of 3D-printed myoelectric hand orthosis for patients with spinal cord injury’]“Furthermore, if we optimize the orthosis in terms of volume and adjustments, it can be used in the clinic soon and extended to other neurologically injured people, such as stroke or brachial plexus injury patients,” concluded the researchers, following the study.
“It is still an early stage of research, and some areas need to be improved. However, this 3D-printed myoelectric hand orthosis seems to be cost-effective and promising to utilize as an alternative to conventional devices. We hope that this study will be the cornerstone of research on assistive devices using 3D printing technology.”
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
3DPOD Episode 198: High Speed Sintering with Neil Hopkinson, VP of AM at Stratasys
Neil Hopkinson, a pioneering 3D printing researcher, played a pivotal role in developing a body of research that is widely utilized today. He also invented High Speed Sintering (HSS), also...
GE Additive Transforms into Colibrium Additive in New Brand Move
One of the largest and most compelling companies in the 3D printing industry, GE Additive, has undergone a rebrand. Now, known as Colibrium Additive, the company and its new name...
HP & INDO-MIM Collaborate to Boost Metal 3D Printing in India
HP Inc. and INDO-MIM, a US- and India-based supplier of metal injection molding (MIM) powders and contract manufacturer, have announced that the two companies will collaborate to accelerate additive manufacturing...
Nylon 3D Printed Parts Made More Functional with Coatings & Colors
Parts 3D printed from polyamide (PA, Nylon) 12 using powder bed fusion (PBF) are a mainstay in the additive manufacturing (AM) industry. While post-finishing processes have improved the porosity of...