Study Subjects Prefer 3D Printed Splints to Conventionally Manufactured Ones

Formnext

Share this Article

Occlusal stablization splint

Occlusal stabilization splints are prescribed for people who tend to clench or grind their teeth. They’re typically worn at night, and while some people tolerate them well, others find them highly uncomfortable, sometimes to the point of noncompliance. But as 3D printing has become more accessible to the dental industry, some dental professionals have wondered if 3D printed occlusal stabilization splints might be made to be more comfortable than conventionally manufactured ones.

3D printing has shown promise with splints of other kinds. 3D printed splints have shown themselves to be more flexible, breathable and comfortable, and they can be made to be extremely lightweight while still offering the same kind of support and protection that conventional splints do. In addition, they can be customized to fit better than traditional splints can. Casts, too, have been greatly revamped using 3D printing, such as the waterproof customized casts from ActivArmor.

A 3D printed arm splint.

In a study entitled “Clinical comparison of conventional and additive manufactured stabilization splints,” a group of researchers focused on occlusal stabilization splints to compare patient comfort and satisfaction between conventionally manufactured and 3D printed devices. 14 test subjects underwent treatment with occlusal stabilizations splints over a period of 12 weeks. Seven of them received conventionally manufactured splints (CM-SS), and seven received additively manufactured ones (AM-SS). 12 of the subjects completed the 12-week follow-up period.

While the splint manufacturing method had no significant influence on the outcome of the treatment, a significantly larger number of subjects reported feeling greater comfort with the 3D printed splints than with the conventionally manufactured ones. On a scale of 0 to 100, with 0 representing excellent comfort and 100 representing great discomfort, the mean result was 15 for the 3D printed splints and 42 for the conventionally manufactured splints.

“There was no significant difference in mean delta change for unassisted jaw opening from baseline to 12 weeks between the two groups, for CM-SS it was 2 mm difference and for AM-SS the difference was 3 mm,” the researchers state. “All subjects in both treatment groups showed improved oral function.”

All of the subjects underwent both traditional alginate impressions as well as intraoral digital scanning in order to create the models for their splints. Unsurprisingly, the subjects greatly preferred the scanning to the impressions, although the scanning took longer.

The study shows that there is great promise for the 3D printing of occlusal stabilization splints. Overall, the dental and orthodontic industry is taking a lot of notice of 3D printing technology. 3D printed molds for orthodontic aligners are a very big topic of conversation in the industry right now, as the technology allows for reduced costs, faster turnaround, and efficient mass customization. As 3D printing materials progress and more biocompatible materials are developed, we may also see aligners and other orthodontic devices being directly 3D printed, reducing costs and speeding production even further.

It’s not only dental labs that are turning to 3D printing, either. Dentists and orthodontists are beginning to install 3D printers directly in their offices, so that they can create custom tools and devices right as they need them. This study shows that not only is 3D printing more convenient for manufacturers and dental professionals, but that it is preferred by patients, at least in the case of splints.

Authors of the paper include Christian Berntsen, Martin Kleven, Marianne Heian and Carl Hjortsjö.

Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below.

 



Share this Article


Recent News

3D Printing News Briefs, July 12, 2025: Nerve Repair, Glass Nanostructures, adidas, & More

Havaianas Collaborates with Zellerfeld to Launch 3D Printed Flip-Flops



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

The Dental Additive Manufacturing Market Could Nearly Double by 2033, According to AM Research

According to an AM Research report from 2024, the medical device industry, specifically in dentistry, prosthetics, and audiology, is expected to see significant growth as these segments continue to benefit from...

Featured

Heating Up: 3D Systems’ Scott Green Discusses 3D Printing’s Potential in the Data Center Industry

The relentless rise of NVIDIA, the steadily increasing pledges of major private and public investments in national infrastructure projects around the world, and the general cultural obsession with AI have...

AM Research Webinar Explores Continuum’s Sustainable Metal Additive Manufacturing Powders

Metal additive manufacturing (AM) powder supplier Continuum Powders is working to develop solutions that empower industries to reduce waste and optimize their resources. An independent life cycle assessment (LCA) of...

3D Printed Footwear Startup Koobz Lands $7.2M in Seed Round

California-based Koobz is focused on reshoring the U.S. footwear supply chain with advanced manufacturing processes, including 3D printing. The startup just announced that it has added $6 million to its...