Exone end to end binder jetting service

3D Printed Ballet Shoes Offer Dancers Support and Protection From Injury

INTAMSYS industrial 3d printing

Share this Article

Ballet dancers make what they do look effortless, but it’s far from it. If you’ve ever seen a ballet dancer’s feet, you were probably shocked, but bruised and bloody feet are normal for these athletes. Dancers accept that their work is going to cause them pain, but Bezalel Academy of Arts and Design graduate Hadar Neeman realized, after seeing a ballet dancer friend’s feet, that she could do something about it.

Neeman graduated with a degree in product design and was looking for a field where she could apply 3D printed fabrics. After seeing the damage her friend had suffered from dancing, she began investigating the creation of a 3D printed ballet shoe – as far as she knew, no one had made one yet, although 3D printing has been employed to create several other types of footwear, such as athletic shoes, sandals, and high heels.

“I learned about pointe shoes and the more I got into the field, the more I realised that there was a lot of potential for improving the existing shoe and improving the quality of life of the dancers,” said Neeman.

Neeman designed and 3D printed a ballet shoe called P-rouette. She used a lightweight lattice structure for the sole as well as the insole. The satiny upper part of the shoe was cut on a special shoemaker’s last that Neeman designed herself, and is placed between the sole and insole during printing, trapping it so that no glue or stitches are needed. The toe of the shoe is 3D printed from the same lightweight lattice material.

As with most other 3D printed shoes, the P-rouette shoe is customizable in order to perfectly fit the feet of each individual dancer. The dancer simply takes a scan of his or her feet, using an app, and the scan is then used to create a detailed map and then a 3D model. Each shoe is then optimized for perfect fit and comfort.

“We are living at an age where technology is prevalent and accessible in almost any field, particularly in sports,” said Neeman. “Why were pointe shoes left behind? In order to allow customization for professional dancers, most pointe shoes are still created by hand using traditional techniques.”

Those techniques leave a lot to be desired; dancers commonly pad their shoes to safeguard against injuries, but injuries still happen. P-rouette shoes offer extra support in addition to customized fit, protecting against the kinds of injuries that are common to ballet dancers. The shoes are also three times more durable than conventional ballet shoes, which typically last through only 10 hours of dance.

It will be interesting to hear feedback from ballet dancers who try out the 3D printed P-rouette shoe in regards to its comfort and level of protection from injury. Could the production of ballet shoes become an industry that gets taken over by 3D printing? If the technology can reduce pain and injury, there’s little reason not to use it. The footwear industry as a whole is embracing the mass customization possibilities that 3D printing offers, and Neeman is right – why not ballet shoes? It’s high time that ballet dancers got some relief.

Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below.

[Source: Dezeen / Images: Hadar Neeman]

Share this Article


Recent News

3D Printing Webinar and Event Roundup: September 26, 2021

3D Printing News Briefs, September 25, 2021: Partnerships, Software, & More



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

3D Systems Finalizes Sale of On-Demand Business, Will Operate as Quickparts

Pioneering additive manufacturing solutions provider 3D Systems finalized the $82 million deal for the sale of its on-demand 3D printing and custom manufacturing business. The rebranded company will operate as...

3D Printing Webinar and Event Roundup: September 19, 2021

We’ve got another busy week of webinars and events to tell you about! Topics in this week’s roundup run the gamut from 3D digital textures and FDM 3D printing potential...

3D Printing News Briefs, September 18, 2021: Business, Materials, & More

We’re filling up the front of today’s 3D Printing News Briefs with plenty of business, as one company celebrates an anniversary and two others welcome new executives to their ranks....

3D Printing Service Hubs Appoints New CEO, Alex Cappy

Changes are taking place at Hubs since it was acquired by manufacturing service provider Protolabs (Nasdaq: PRLB). Not only has the subsidiary removed the “3D” from its name, but it...


Shop

View our broad assortment of in house and third party products.