MiiCraft Introduces the MiiCraft 125 3D Printer, Optimized for Jewelry Casting

Share this Article

News photo-MiiCraft 125-2A few years ago, Taiwanese optical component manufacturer Young Optics decided to get into 3D printing, and the result was a new spin-off company by the name of MiiCraft. The company would go on to create the world’s smallest DLP desktop printer in the tiny MiiCraft+, and now they’re introducing the next in their line of DLP 3D printers. Meet the MiiCraft 125, a big, versatile and precise machine that the company describes as ideal for the jewelry and dental industries.

The MiiCraft 125 is at the opposite end of the spectrum from the MiiCraft+, size-wise at least. Like many 3D printers, it takes its name from its build volume, which in this case is an impressive 125 x 70 x 120 mm. Translated into jewelry terms, it can accommodate more than 50 rings in one build, or, for the dentistry industry, seven dental arches. It doesn’t disappoint in terms of resolution, either, with a range from 30μm to 65μm.

3bf54a8f-a622-41cb-8170-6304ea5533d6It appears that the MiiCraft 125 employs the best of both worlds in terms of automation and control. The user has a lot of flexibility and control over parameter settings such as layer speed, printing time and peeling steps, thanks to an intuitive and easy-to-use interface, yet the printer also offers the convenience of automated features, e.g., auto calibration. The MiiCraft software allows for easy design modifications and fixes such as surface smoothing, edge enhancement and blurring. Real time print status monitoring is offered, as is a stop/check function.

In terms of materials, MiiCraft offers a good variety of resins, but the 125 is also compatible with third party resins. A few technical specifications include:

  • Printer size: 43 x 43 x 59 cm
  • Build volume: 125 x 70 x 120 mm
  • Resolution: 30μm to 65μm
  • Wavelength: 405 nm
  • Interface: Ethernet, USB

Jewelry casts produced on the MiiCraft 125 were recently showcased at the VICENZAORO International Jewelry Show, which took place from April 14-17 at the Dubai World Trade Centre. The market for 3D jewelry printers is becoming a competitive one, with companies such as EnvisionTEC setting the standard with their numerous printers optimized for the jewelry industry. They unveiled their latest, the MicroPlus cDLM, only days ago. The MiiCraft 125, though, has definitely shown itself already to be capable of some impressively detailed resin casts, as seen at VICENZAORO. I suspect that MiiCraft as a company will gain some favorable reviews and likely become a bigger name in the jewelry printer industry with the 125’s release.

vod6.4

Jewelry casts produced on the MiiCraft 125 and showcased at VICENZAORO

Pricing for the MiiCraft 125 is not currently available on the company’s website, but you can find out more about pricing and ordering details by emailing them at [email protected]. According to the company, it’s very reasonably priced, so if you’re in the market for a DLP printer, it certainly sounds like it’s worth an inquiry. Would this hardware suit your design needs? Lets talk about it further over in the MiiCraft 3D Printer forum at 3DPB.com.

Share this Article


Recent News

Cellink Subsidiary Cytena to Launch “World Changing” Single-Cell Technology

Through a Glass Clearly: 3D Printing Glass with Lasers and Clear Silica Resin



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Circular Economy Under-explored in 3D Printing, Say Researchers

Researchers from UNIDEMI at the Universidade NOVA de Lisboa in Portugal took note of the fact that, while 3D printing could serve as a key technology in a circular economy,...

Soft, Sensitive Robotic Gripping Fingers Made with Multi-material 3D Printing

Soft grippers enable robots to manipulate delicate objects, but this doesn’t necessarily mean that they’re safe to use around living organisms, such as elderly people, so researchers continue working to...

How Satisfying is Your 3D Printer? Researchers Improve Operator “Emotional Fusion” to 3D Printing Equipment

Researchers from the School of Mechanical Engineering at Shenyang University of Technology in China think that the emotional relationship between laser powder bed fusion (LPBF) 3D printers and their operators...

3D Printed Insoles Absorb Sweat to Power Electronics

Sweating is not really pleasant, but it’s a normal, natural way for the human body to regulate body temperature by decreasing thermal stress, which can occur for a number of...


Shop

View our broad assortment of in house and third party products.