Wurth

3D Printed Drone Army Could Have Found Malaysian Airliner, Claim Researchers

Formnext

Share this Article

A few weeks ago the internet was buzzing about a new 3D printed aerial drone created by British researchers. Just after the drone was shown to the world, we all got word that Malaysia Airlines Flight 370 had gone missing drone-1somewhere off the coast of Asia, with 239 people on board. Fast forward 16 days, and the plane still has not been found. The likely scenario is that it crashed somewhere over the Gulf of Thailand or South China Sea, but any number of less likely possibilities may have also taken place.

British researchers at the Advanced Manufacturing Research Centre (AMRC) in Sheffield, who created the 3d printed unmanned aerial vehicle, claim that such a drone could be used for emergency search operations such as that of Malaysia Airlines Flight 370.

Researcher, Mark Cocking stated, ‘With the recent aircraft that’s been lost at sea, if you had a fleet of these you could send them out [looking for the aircraft or debris] in 24 hours.”drone-2

The researchers were able to print the drone with ABS plastics, saving a tremendous amount of time and effort over traditional manufacturing methods. They, of course, don’t have dozens of these printed out ready to participate in a search mission, however the difficulty in finding the lost Malaysian aircraft certainly should prioritize this technology for similar future operations.

The drone, which was 3d printed , weighs just 2kg, is approximately 1.5 meters in width, and was printed out on a Stratasys Fortus 900mc FDM printer. There is still a lot of work to be done before this drone or ones similar could function as a search aircraft, but the team is making substantial progress each day. Discuss the possible uses of 3D printed drones in search operations at 3dprintboard. Check out a test flight of this drone as a glider, without a propulsion system below:



Share this Article


Recent News

Air Force Awards 3D Systems $7.65M Contract to Continue Work on Large Format Metal 3D Printer

The Business Case for Binder Jet in an Uncertain World: A Foxconn in the Henhouse, Part 5



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

The Business Case for Binder Jet in an Uncertain World: Changes, Part 4

In rough seas, binder jet as a market is underpinned by a collection of firms, some large and small. We looked at their potential staying power, the applications and parts,...

Featured

The Business Case for Binder Jet in an Uncertain World: Shook Ones, Part 3

In the classic tune Shook Ones Pt II by Mobb Deep, we get introduced to “all of those who wanna profile and pose,” but when the going gets tough, they...

Featured

The Business Case for Binder Jet in an Uncertain World: On A Jet Plane, Part 2

We’re in the doldrums. And binder jet is more in the doldrums still. In the first article in this series, we looked at how Jedi Mind Tricks got us to...

Featured

The Business Case for Binder Jet in an Uncertain World: Jedi Mind Tricks, Part I

You’ve probably noticed that the binder jet market has been rather rocky as of late. Voxeljet was delisted, was not sold, and is now restructuring. Nano Dimension subsidiary Desktop Metal...