3D Printed Polar Drawbot Can Make You a Modern Day Michelangelo

RAPID

Share this Article

13

[Image Attribution: Stephen (kongorilla) Kongsle] Kongorilla’s work was among the inspirations for Carlo’s design

Carlo Franciscone, an Italian engineer from Novara, has done a redesign of the mechanical parts used to build a wall-mounted Polar Drawbot based on work he’s seen by others on the web, and the result is one of those “take my money” items.

In case you’re not familiar with the concept, a Polar Drawbot is a polargraph mural drawing robot intended to teach students about programming, physics, trigonometry, and electronics. The Makelangelo iteration of the device is essentially an “art robot” which hangs on a vertical surface and, with nearly the same technology as a 3D printer, uses a pen holder, software, steppers, and motor mounts to trace out an image of your choosing. Software converts PNG, JPG, BMP, and GIF images to the instructions to draw the finished product, and as an added bonus, includessupport for DXF files.

ghizmo_drawbot_25_preview_featured

Franciscone says the electronics and firmware come from the Makelangelo project using version V1 of the Adafruit motor shield, he used a DK Electronics motor shield for his project. As for Makelangelo, it’s also scalable and the project team say test models have ranged from being capable of drawings from 30cm2 to 300cm2.

After several test trials using parts he had close at hand, Franciscone found that none seemed to match his requirements closely enough for his taste, so he began to completely redesign each and every part to put his personal stamp on the device.

ghizmo_drawbot_010_preview_featuredFranciscone says the testing revealed he would need three separate types of pulleys: one used for smooth cords and the others to take on the task of moving the power through a synchronous transmission he made with ball chains.

For his project, he used 3.2mm all metal chain with a pitch of 4mm, 4.4mm plastic ball and cord with a pitch of 6mm, and a plastic ball and cord of 4.4mm with 12mm pitch.

He says that while the various chains can be used interchangeably, the pulley diameters in the machine setup must be changed as well to avoid results which mess up the aspect ratio of the finished drawings. As a counterweight, Franciscone used a “D” type battery past it’s prime and a holder he made to to hang it.

He says his parts were inspired, to a large extent, by work done on a similar project by fellow Thingiverse user Kongorilla. You can see Kongorilla’s photos of the project, as well as a whole bunch of very cool other projects, on his Flickr photo stream.

And by all means, check out this interview with Dan Royer of Marginally Clever below.

Can you see yourself building this Polar Drawbot based on the Makelangelo version by Dan Royer? Let us know in the Polar Drawbot forum thread on 3DPB.com. Check out the video below showing the drawbot in action.

ghizmo_drawbot_13_preview_featured

ghizmo_drawbot_22_preview_featured

 

Share this Article


Recent News

3D Printing Financials: Velo3D Sees Better Q1 2024 After Difficult Last Quarter

Aerospace OEM Invests $9.1M in Michigan for Metal 3D Printing and More



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Wisconsin’s Evology Adds Digital Sheet Forming to Service Roster

Evology, a service bureau based in Wisconsin and specializing in serving strategic sectors like aerospace and defense, has added digital sheet forming (DSF) to its repertoire of manufacturing capabilities. Evology...

Boring Company Alum Score $9M for Advanced Composites Manufacturing

Layup Parts, a Huntington Beach, CA-based startup specializing in on-demand manufacturing of parts made from composites, has received $9 million in its latest financing round. Founders Fund, the VC firm...

Featured

Industrial Giant Ingersoll Rand Leads $19M Round Backing Inkbit’s AI-Driven 3D Printing

Inkbit, the Massachusetts-based original equipment manufacturer (OEM) of multi-material, AI-integrated 3D printers, has closed a $19 million financing round. Ingersoll Rand, a US giant in the industrial equipment sector, led...

3YOURMIND & Nigerian Oilfield Services Firm RusselSmith Team Up on 3D Printed Part Inventory

3YOURMIND, the German and U.S. software services provider specializing in digital inventory platforms for additive manufacturing (AM), has partnered with Nigerian oilfield services firm RusselSmith to digitize spare part files...