3D Printing News Unpeeled: Bridges in India, Zellerfeld and Creality´s K1

RAPID

Share this Article

Zellerfeld has worked with Pangaea to develop a TPU 3D printed sneaker. The pair tout the fact that it is mono material as the major selling point and wish for it to be circular. The shoe retails for $250 I believe that a similar piece of footwear could be the major 3D printing breakthrough, but I believe that in order for it to be comfortable it would have to be a slipper.

The Department of Civil Engineering of IIT Hyderabad has under professor KVL Subramaniam made a 3D printed concrete bridge together with Simpliforge Creations. The print time is two hours and the team is looking to load test it and reduce the amount of concrete in it. I really believe that cost effective precast replacements like this one could bring a true infrastructure revolution to the developing world by letting people truck in infrastructure that is made close by but not on site. 

Creality released the K1 a CoreXY 3D printer. They should have called it a Panda because it is meant to eat bambo. The print speed is 600 millimeters per second, with a build volume of  220 by 220 by 250mm while the Max version is 300 by 300 by 300mm. It has LIDAR for first layer an AI powered camera for error detection, ringing reduction and better model cooling. The printer comes with a 1.2 Ghz CPU, a ceramic heater and better software and will retail at $699 while the Max is $999. This is a very important 3D printer. The Bambu Labs printers have changed the game and Creality needs to catch up or best them. 

Share this Article


Recent News

3D Printing News Unpeeled

Himed and Lithoz Launch Center for Bioceramics 3D Printing



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Slice Engineering and Egyptian NGO Give Amputees Free 3D Printed Prosthetics

Florida-based Slice Engineering believes that additive manufacturing can reshape industries and make a lasting impact on humanity, and so works hard to empower innovators and professionals. The company does this...

3DPOD Episode 197: Ceramics 3D Printing with Johannes Homa, Lithoz CEO

Lithoz is a pioneer in the 3D printing of technical ceramics, initially using a ceramic-loaded stereolithography process and later adopting multiple technologies. Johannes Homa, a researcher turned entrepreneur, discusses his...

AddUp Announces Deputy CEO & Innovations in Medical & Injection Molding AM

Global metal 3D printer OEM AddUp, a joint venture between French tire giant Michelin and Paris-based industrial engineering corporation Fives, appointed Julien Marcilly as its new CEO at the end...

Lithoz Expands Ceramic 3D Printing to Japan via New Network

Lithoz is securing the future of its ceramic 3D printing technology in Japan with the formation of a new coalition with leaders from the country’s ceramics and manufacturing industries. Together...