Russian cosmonauts will launch the satellite from the outer surface of the ISS this summer, which will be, according to Yakovlev, “a tricky and expensive procedure, preceded by repair of the modernization of the space outpost.” Once it is launched, the Tomsk-TPU-120 will be in free flight mode for about six months, during which time its orbit will gradually ebb, until it eventually reaches the dense layers of the atmosphere, where it will be destroyed.“The Tomsk-TPU-120 is the first such project in the world, in which the entire casing of a satellite is fully printed using dynamic modeling,” said Yakovlev. “The combination of these technologies can significantly reduce the development time and the number of full-scale tests, find new engineering solutions and reduce the project’s cost.”
Yakovlev said, “Experiments with the satellite were conducted not only on board the ISS, but also on the ground. Many radio amateurs from all across the world were able to catch a satellite signal on their radio stations, and posted videos of it on the Internet.”
Take a look at their video of people picking up the satellite signal from the ground; really, all you need to do is listen!
Yakovlev says the Tomsk-TPU-120 will not be the last small satellite they work on developing during their ongoing project:
“The current project is just the first stage of a long-term project to develop and create small, multi-purpose satellites. In particular, this work pertains to the creation of an on-orbit group of satellites dealing with many urgent problems related to agriculture, forest fires, climate change and natural resources.”
He also mentioned that just a couple months ago, Roscosmos approved experiments that would focus on creating CubeSat satellites on board the ISS, with the help of a 3D printer, and being placed in orbit from there. These small, lightweight satellites are usually at least partially 3D printed, and can be launched for all sorts of purposes, including Earth imaging and atmospheric research.
Discuss in the CubeSat forum at 3DPB.com.
[Source: Sputnik News]