In ‘Ultraviolet photolysis of acetaminophen in a 3D printed continuous flow reactor,’ thesis student John Goetze is not only exploring the benefits of urine as fertilizer but also experimenting with 3D printing devices that could be used in the field to pinpoint degradation of chemicals like pharmaceuticals that are harmful to agriculture. While many consumers may be leery about their potential food supply being sprayed with a supply of urine from the public, even worse would be ingesting the surprising amounts of unmetabolized pharmaceuticals. Degradation of residual medications could render the use of urine as a possibility, however.
“Phosphorus is the most important of NPK when considering urine for its fertilizer value. Source separation of urine maximizes its value for fertilizer. Obtaining phosphorus from wastewater is more difficult, as it is diluted and possibly contaminated with other materials auxiliary to those in urine. Widespread source separation in developed countries would require retrofitting of current sanitation facilities,” states Goetze.
Pharmaceuticals do present an issue, however, posing ‘ecotoxicological risk,’ mainly by NSAIDs, antibiotics, and carbamazepine. And while much of the benefits of prescribed (or not) drugs are metabolized, large portions may still be left to pass through the urine.
For the purposes of this study, Goetze used acetaminophen, which is also commonly referred to as paracetamol. The author used this over-the-counter pain reliever for the following reasons:
- Measured consistently in wastewater
- Easy to obtain
- Can be measured with UV spectroscopy
- Absorbs UV light
Goetz 3D printed most of the parts (nine, in total) for the continuous flow reactor, designing them in SOLIDWORKS and then using a MakerBot Replicator 2 FDM printer with PLA.
“Trials showed that more acetaminophen is degraded as residence time and light intensity increase. Continuous flow reactor performance is comparable to MFR and PFR idealized models with respect to residence time. Data corresponds more closely to the ideal reactor models as light intensity decreases. Pseudo-first order rate constants (k’) were determined using a best fit of MFR and PFR models to the data at each separate intensity. Rate constants increased linearly with light intensity,” concluded the author.
Up to 80 percent of the acetaminophen was degraded in the experimental conditions of the continuous flow reactor. This demonstrates that levels of the pharmaceutical can be significantly reduced via UV photolysis. The reactor design can be easily scaled up, since the specialized components can be produced quickly with 3D printing. Artificial light sources producing an intense 254 nm wavelength are commonly available on the consumer market. The lack of catalysts and oxidizers reduces costs and eliminates some materials access barriers. The reactor, artificial light, and pump apparatus can be applied quickly and cost-effectively in laboratory or industrial settings. The photolysis data from this study can inform the design of future applications.”
3D printing has been connected with innovation in diagnostic devices due to the ease in design and production, and affordability in manufacturing—especially in the medical field, from innovations for detecting cancer to malaria and even tuberculosis. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.
[Source / Images: ‘Ultraviolet photolysis of acetaminophen in a 3D printed continuous flow reactor’]