As we walked among the shelves of 3D printers, we were joined by Founder and CEO Rick Pollack for a quick chat in the busy day. Following a recent discussion in a 3D printing group on Facebook, and surrounded by shipments waiting to happen, I asked Pollack about shipping for the company, as several (non-MakerGear) customers had recently shared horror stories online about mishaps in receiving 3D printers they had ordered, dumped unceremoniously down stairs or tossed onto porches for delivery. That hasn’t been much of a concern for them, Pollack told me, as their shipments have all seemed to make it safely — but they have had some concern about Internet fraud, as any company operating online does. As Pollack was able to name only a couple of scenarios offhand, however, it’s clear that these unfortunate occurrences are certainly far from the norm. MakerGear is maintaining vigilance against fraud these days, so criminals beware.
Moving away from the ready-to-ship machines, Schoeniger and I continued our look at the testing stations, as he pointed out various components ready to be installed on the machines, many of which are themselves 3D printed on a line of M2 3D printers whirring away at a workstation near the desk space in the front of the offices. Nine linked M2s are constantly at work, 3D printing more ABS parts in a semi-enclosed work area, linked together through OctoPrint on a single computer. The multitude of 3D printed 3D printer parts comes in handy for both customer and manufacturer, as parts can be upgraded or customized — or even replaced, as Schoeniger told me of the trip to Germany last year when an M2 needed for their showing there required a new shroud, which after a quick visit to GitHub they were able to create in time for the show. The ease with which parts can be replaced and fixed comes in handy, as numerous examples prove; another case Schoeniger touched on was a recent trade show where a booth was showing off a professional, $10K+ 3D printer… but couldn’t have it printing onsite due to a clogged nozzle, which would be too complicated to remove, clean, and refit on the show floor. An M2 took its place so that booth could still show active 3D printing.
Accessibility is an important consideration for MakerGear, as the workhorse mentality for the M2 remains in sight. The desktop 3D printer may not be the most beginner-friendly on the street, but it also isn’t terribly difficult to learn.
“We don’t resort to complexity unless it’s absolutely necessary,” Schoeniger told me. “We stick to the KISS theory — keep it simple, stupid. It’s a simple, accessible approach. 3D printing isn’t just about layer height and how many extruders your machine has. We see it as actually giving a professional-level experience without costing an arm and a leg.”
Comparing their 3D printers to cars, Schoeniger pointed out that while an automatic transmission may make a car easier to operate than a standard, there’s just that much more that can go wrong with it. The M2 isn’t exactly automatic, but that keeps operations smoother functioning.
“This can be your first 3D printer, but it can also take you farther. These are used at Tri-C [Cuyahoga Community College], where students are not afraid to walk up to these, like they are with higher-end machines, and they can still get done all they need to do,” Schoeniger said. “It’s interesting that the same unit can be used for kindergartners to print musical instruments they design on Tinkercad and for professional engineers creating tooling.”
The M2 does not feature an enclosure, which may seem concerning for use in kindergarten classrooms, but Schoeniger points out that many educators have said the openness is actually a benefit, as students can see up close exactly what’s happening in the process — though of course a physical barrier between the youngest students and the machine is recommended to keep small hands away from hot components.
Through the facility in Novelty, MakerGear now doesn’t have to go to another vendor, leading to significantly shorter turnaround in sampling new materials, creating new prototypes, and working on enhancements and tweaks to their machines. The original M2 was introduced in 2012, and the fifth-generation model contains more than 50 incremental improvements made over the last five years; tweaks and improvements can now come even faster with the close turnaround, as this facility makes 8-10 parts for the M2: “The most critical parts,” as Schoeniger put it. The operations at this facility is only three men, but it creates a sense of close teamwork, ensuring that all the same values are operating throughout with a “very homegrown” mentality of dedication.
“Everyone who works here works hard, making sure nothing gets past us,” Zeitz said of the team.
During my day with MakerGear, conversation often came back to values. The company values workhorse performance in the machines they put out, which can only come together thanks to standardized high expectations across the board. As Pollack notably loves the sleek appearance of sturdy black metal, the team works to create machines that will last and will meet his high standards. With the value placed on homegrown ties, we also see significant links across Ohio — Zeitzer and Pollack are both graduates of the University of Cincinnati; many machines in the R&D shop are from Cincinnati Milacron; Simplify3D software that MakerGear favors is based near Cincinnati; even See’s Candies has a Beachwood location. Keeping operations and production within a limited geographic area ensures that a close eye can be kept at all times on all parts of the company, lending a strong sense of team spirit as everyone at MakerGear shares a bond as a community in themselves, striving to not only create a powerful product, but to offer support and enhancements for it in a constant cycle of self-aware improvement.
We’ll be following up soon with an interview to learn more about MakerGear’s history, aspirations, and thoughts on the industry. Below are some more photos from MakerGear’s operations:
Interested in having 3DPrint.com visit your site? Let us know! Drop me an email any time. We love to see where the technology we write about comes to life, and to meet the teams behind the news!
[All photos: Sarah Goehrke for 3DPrint.com]