Following my morning cup(s) of coffee, I had the pleasure of starting my day out by walking into the keynote presentation given by Andrew Rush, president of Made In Space, as Inside 3D Printing really kicked off here in sunny Santa Clara. The keynote, “The Era of In-Space Manufacturing Has Begun,” certainly started this conference, put on by MecklerMedia, with a bang, bringing our attention to the literally out-of-this-world applications of 3D printing technology.
As space exploration becomes more possible and more accessible by the day, organizations like NASA have been focused on getting there. Made In Space realized, though, that “when you get to Mars or get to the moon, you’re going to need tools,” as Rush explained. For the astronauts and other explorers who need these tools, key considerations include how to get them, how to meet needs that arise in real time, and how to replace lost or broken tools, among others.
“A 3D printer is like a meta-tool,” Rush said. “It can self-replicate and even self-build, while making other tools.”
For any tool or piece of equipment to be useful in space–relating directly to the International Space Station (ISS)–it has to first get there. This can be incredibly problematic, as a critical part of that process determines how realistic it is to expect any hardware to be put into use: the launch. This less-than-10-minute window is so incredibly stressful to a payload that the logistics must be spot-on to ensure safe, intact arrival.
“Everything that has Gone or is Going to Space has been Overdesigned,” Rush’s presentation laid out, “Primarily for launch.”
Components that fail, either during launch or while in use on the ISS, certainly hold up progress that can be achieved. While some failures are potentially catastrophic, others are simply inconvenient. Inconvenience in orbit tends to be a little more inconvenient than misplacing a tool at home. In any event, NASA took a hard look at how they might combat such failures onboard, and the answer probably won’t surprise anyone familiar with next-gen tech: additive manufacturing holds extreme promise to save the day.
The first Made In Space 3D printer, sent up to the ISS in September 2014, was the size of a breadbox, and set straight to work on producing increasingly complex objects, from a faceplate to tools, with the first 20 tools created via pre-loaded files sent up with the printer. The 21st print, though, was a torque wrench that represented “The fastest anything has ever gone to the Space Station,” as it was turned from an emailed file to a physical wrench in an incredible two hours. The longest part of that process, Rush said with a grin, was the time it took ISS Commander Butch Wilmore to get to the printer to remove the wrench from the build plate (“Astronauts are very busy!”).
Next up for Made In Space is their upcoming next-gen AMF machine, which will launch this year. Smaller than a microwave oven, the AMF has a 10 x 10 x 20 cm build area, and can print in various materials already including ABS, HDPE, and PEI/PC, and upgradeable to print low-temperature metals and eventually multi-material operations.
On the materials side of things, Rush was very clear:
“Recycling is key,” he said, “for Earth-independent production.”
Prints made off-planet must be made in a renewable, accessible, safe manner. Made In Space already works with a thermoplastic recycler that turns plastics like sandwich bags into functional 3D printing filament. The company is looking as well at using native materials. Addressing the potential use of regolith gathered from a site on the moon, Rush noted that that would be “pretty cool to put on a resume.” Prints made using Made In Space’s technologies are designed to be created without support, as removing small structures can produce a strong risk of debris.