Other individuals have already 3D printed a saxophone; Olaf Diegel holds the distinction of printing the world’s first saxophone and he elaborated on some of the challenges that accompanied the project. Not a stranger to 3D printed musical instruments, Diegel is known for 3D printing both a guitar and a drum set. He added the saxophone to his list of instruments in July 2014. His was printed in Duraform nylon powder. That is perhaps the greatest difference between Diegel’s sax and ITRI’s sax: the machines and materials used in the process. ITRI used a metal 3D printer to make its saxophone.
Taiwan’s ITRI, which collaborated with Yifeng International, Inc. for this project, wanted a way to exhibit its Optical Engine for Material Grain Microstructure Controlling Additive Manufacturing Technology. ITRI unveiled its first metal printer last May, which was marketed mainly for producing jewelry. (Optical Engine technology has already been nominated by R&D 100 Awards in Taiwan this year.) ITRI’s Optical Engine for Material Grain Microstructure-Controlling Additive Manufacturing Technology can adjust the interactions between the laser beam and the material in the solidification process to change the material grain microstructure of the metal. The optical engine can alter strength, hardness and toughness of different parts of a component, if needed
According to Yu Guixin, Assistant Manager of ITRI, most 3D printers can only manufacture “single mechanical propert[ies],” however, the Optical Engine technology used by ITRI can create different levels of toughness and hardness in one single component. Manufactured by a metal printer, this saxophone may not be the first 3D printed sax, but it is likely the toughest. The printer used for the saxophone uses titanium alloy powder and can manufacture “10 cm3 and 25 cm3 work pieces, achieving precision of 50 µm (equal to the radius of a human hair), and a density of about 99%.” That’s one tough saxophone!
Again, when I am writing these pieces on musical instruments, I always want to hear their sound. Maybe we will get the chance to do so at some point! What are your thoughts on this 3D printed instrument? Let us know in the Metal Saxophone forum thread on 3DPB.com.
[Source/Photo: CTIMES]