Indeed, Dr. Wong specializes in, says the website of her company 3D4MD, “3D printing medical devices in austere environments.” When they say “austere,” they aren’t exaggerating–as she was the first person to “3D print medical supplies at the Mars Desert Research Station.” In the interest of making the latest in lifesaving technology to even the most remote regions of the Earth, Dr. Wong designed a 3D printer that is solar powered and small enough to be easily transported.
Dr. Wong recently conceived of a way to 3D print custom finger splints for a common hand injury called “mallet finger.” There are actually multiple names for mallet finger–”baseball finger,” as when you attempt to catch a baseball and jam your finger, “dropped finger,” and “dolphin finger,” among others. More generally, the injury that results in mallet finger is called “extensor tendon injury. When one of your fingers is extended, meets with blunt force (with a baseball or anything else), and gets jammed, the result is a ruptured or stretched extensor digitorum tendon, which runs through the hand into the wrist and up the arm.
Patients with mallet finger cannot extend the affected finger and they also experience numbness and pain. If the injury is really severe, the patient receives medication for pain and to prevent infection. Mallet finger is most often treated without surgery and primarily with a splint. For most patients, the splint must be worn for six to eight weeks and works to help the tendon return to its normal length prior to the injury.
Dr. Wong explained in this regard:
“To have a custom mallet finger splint made by a hand therapist a patient usually has to cover the hand therapist’s labor time as well as the material costs. The material cost of 3D printing is half the material cost of making a mallet splint with a hand therapist. And, 3D printing custom mallet splints saves labor time because you’ve automated part of the splint-making process.”
In her video concerning the custom finger splints, Dr. Wong explained the philosophy behind 3D4MD’s efforts. Not only is the company concerned with providing for the medical needs of patients who don’t have ready access to care because of their locations, but they also want 3D printing to be a major tool in providing that kind of thorough health care even in the most remote of areas. Getting the solar-powered 3D printers out to providers in, for instance, rural Canada, allows them to help their patients in a much more immediate way.
She used a familiar saying to elucidate further:
“There’s a saying that if you give a man a fish, you feed him for a day; if you teach him how to fish, you feed him for a lifetime. When doctors join humanitarian medical missions, it’s often only a temporary solution, but now if mission staff take two solar-powered 3D printers with them, they can leave them behind after teaching the clinic staff how to print their own medical supplies.”
See Dr. Julielynn Wong’s 3D4MD website for more information on the company’s past and current projects, including 3D printing personalized assistive devices for people with disabilities, the solar-powered 3D printers, and much more. What are your thoughts on 3D printing with solar power? Let us know in the Solar Power forum thread on 3DPB.com.