You may remember Vishal Patel from an earlier article we wrote about his waterproof cell phone case. Now, Patel has turned his attention back to dry land with the creation of a functional work desk built using 3D printed brackets.
Patel recently completed his degree in Product Design from Ravensbourne, a digital and new media university in London. For his thesis, he was interested in exploring the creation of furniture using desktop 3D printing. He wanted to design a piece that was possible to print on either an industrial printer or a desktop and be truly utilitarian.
“I tested each design by standing on it and moving in every direction as well as jumping on it,” Patel said. “Through this I found that I had to add brackets to the desk because otherwise it was very unstable, those brackets helped to give the desk both structural support and shape.”
The design wasn’t born overnight, and through this process Patel realized that you have to work with a 3D printer in a different way than with other tools. The 3D printer isn’t just a portal for the creation of whatever flits through the imagination, but rather has its own requirements and possibilities. Ignoring those characteristics creates problems for the project, as Patel noted:
“From prototyping to the final product, I had to scrap several design[s] that were causing problems as they kept taking up time and simply were not working. The first design was made from ABS and had a layer separation problem, even when I reoriented the layers in relation to the structural pressure, it simply
kept breaking. I also created using Colourfab Bronze and Taulman Nylon 645 but eventually chose a different material for the final product.”
Patel used a Wanhao Duplicator 4 to create the final pieces from Taulman Nylon Bridge. The pieces created include 2 main joints, 4 support brackets, 4 end brackets, and 4 shoes for a total print time of approximately 30 hours. The main joints take the longest with a printing time of 9 hours each, the support brackets run 2 hours a piece, and the shoes and end brackets take 30 minutes each.
The piece created for his final project is clearly simply a stage in the development of a final product, however it shows great promise. Some people would say that the devil is in the details, but I think Charles Eames said it best when he admonished that the details are not the details. Further refinement in terms of the material and junctures will continue to lead Patel towards a simple, clean, and functional design.
Let us know what you think in the Functional Furniture with 3D Printed Joints forum thread over at 3DPB.com.