Russell says he coded his first game at just 10 years old back in 1990, and he built his first PC at age 15.
“I have always pushed the envelope of what is normal for the time,” Russell says.
Now he operates a website and a YouTube channel under his TechWiz brand.
One of his posts is an examination of alternatives to using acetone to smooth his 3D printed models.
“I wasn’t happy with cold vapour smoothing with acetone (or the dangerous hot method), so I tested out smoothing using epoxy instead,” Russell says. in his video description. He elaborates on his TechWiz Facebook page, “I have tried acetone smoothing on my 3D prints in the past and never really liked the results, so after some research found a solution that provides (or can provide) a safer and more effective smoothing solution for 3D Models.”
Russell used the Z-Poxy PT-39 30 Minute epoxy solution to smooth out his model, and he was rather pleased with the results.
Once you’ve brushed it on, it produces a tough, permanent bond in just half an hour, and one kit includes a 4oz bottle of Z-Poxy Resin and a 4oz bottle of Z-Poxy Hardener. The total working time for the product is around 20 to 30 minutes, and it fully cures in that half hour.
As it contains epoxy resin and polyamide resin, it does, Russell notes, produce some fumes.
Russell says that though he made some mistakes in this first attempt, he addresses them in his video, presented as a top ten list of things to know–and he notes that overall, he was pleased with method and the finished product.
You can check out a video of Russell smoothing out his Darth Vader Melted Mask below.
Have you ever used epoxy rather than acetone to finish off your 3D printed models? Let us know how it worked out in the Smoothing 3D Models With Epoxy forum thread on 3DPB.com.
