The love for gaming is quite simply, ceaseless, and — most definitely — timeless. It doesn’t matter how many years or decades go by. If you can still find kids entranced by Pong, you better bet Mario on retro consoles is still high up on the list for fun for all ages — and especially with minis.
While the retro theme and gaming are a very popular combo, so is the addition of 3D printing and a wide array of customizations. Most gamers love to modify and hack, and if they can make something on their own that creates even more fun, is affordable, and adds a great conversation factor as well, you can bet they are on it—even if hours of hard work are involved simply for the “hey, look at this cool thing I made” factor — as well as the “and it works!” factor.
It’s amazing how much you can do with a first-time 3D design and 3D printing project when motivated by sheer recreation — as is evidenced in the 3D printed miniature Nintendo Entertainment
For under what would be less than $50 USD, Karvonen was able to make a MiniNES by using a 3D printer, Raspberry Pi, and RetroPie.
So what ingredients will you need for this retro recipe of fun? Before cooking up any fun with Mario and his friends, Karvonen recommends the following basics in his Instructable. The list is simple, and gives any maker some pretty good latitude in parts:
- Any type Raspberry Pi
- Four or more GB SD cards
- HDMI cable
- Television
- Case (optional)
- USB extension cable (optional)
With a total print time of 2.5 hours using a Printrbot 3D printer, Karvonen created the 3D design for the case in Sketchup. It took a couple of prints before he got it just right due to the Z axis being a bit too low at first. Karvonen used hand tools to carve out the appropriate holes in the 3D printed 
After putting the SD card in the Raspberry Pi and turning it on, take time to configure it, attach a keyboard, and follow the instructions specific to the RetroPie.
Once you have the two pieces of the case for the device 3D printed, Karvonen recommends putting them together with a soldering iron heated to 210-250° Celsius which will help melt the plastic enough so that you can press the two pieces together with the electronics nicely enclosed inside. After that, it’s time to put on your arts and crafts hat and apron, and paint the MiniNES to your liking.
“Configure the controller to the RetroPie and it’s ‘game on,’” says Karvonen.
With a plethora of retro games available for fun like the Mario series or Legend of Zelda, and far too more many to name, the whole household will be vying to get their hands on this highly affordable console.
Is this a retro gaming design you are interested in 3D printing? Have you designed and 3D printed any gaming consoles or cases of your own? Tell us about it in the 3D Printed MiniNES forum thread over at 3DPB.com. Check out a video of the process, as well as more photos, below.
