There are a lot of 3D printers out there that are built with 3D printed parts themselves. This is seen quite a bit within the RepRap movement, but we have also begun to see some 3D printer manufacturers mass producing their own parts on 3D printers. For example, Lulzbot has a warehouse of 3D printers that are continuously printing parts for their line of machines.
“After a while I asked myself whether I could make a printer on my own,” Reedijk tells 3DPrint.com. “I had access to aluminum extrusions, so I decided to use them for the frame. I didn’t want to make the printer entirely from aluminum parts, as it would be too expensive for my budget at that time, and I knew that RepRap printers used printed ABS parts for construction purposes. First I tried PLA. It was hard enough for construction but when there was pressure on the parts they just broke. I didn’t want to use ABS, just because of the bad fumes alone, so I searched for alternatives. At that time ColorFabb came out with XT. I bought a spool, printed some test parts to test the general strength, toughness and impact strength, and it exceeded my expectations.”
Looking at his Ultimaker Original, which he was very happy with, he based his new XT 3D Printer on its design. However, he elected to increase its print volume to 220 x 220 x 215mm, add a heated print bed, including an integrated power supply, and use a Ubis ceramic hotend.
“I drew the aluminum extrusions of the printer in my 3D program around the print-bed dimensions and then created the parts to make the frame construction,” Reedijk tells 3DPrint.com. “After that I sourced all the parts, built up the printer, step by step, drew all the XT parts and printed them out. At that time, I thought I knew enough about 3D printing, but during the build process I learned a lot more about printing itself (temperatures, print orientations, effects of cooling, etc.), the material XT itself, and the do’s and don’ts when making a printer.”
The end results are a 3D printer that functions extremely well, and looks equally as nice. As for Reedijk’s future plans, he is not yet sure if he will sell DIY kits for the XT 3D Printer, or if it will remain a one-of-a-kind machine. If there is interest from others, he will consider the former.
Currently Reedijk is working on launching a new business of his own, which will launch sometime in January. He is developing a new FDM 3D printer which he says is entirely different than this one. It will be targeted toward industrial business use, and more details will be made available on his website in January.
What do you think of Reedijk’s XT 3D printer? Do you like its design? Do you think ColorFabb XT is a better solution than PLA or ABS when 3D printing parts for a 3D printer? Discuss in the XT 3D Printer forum thread on 3DPB.com. Check out the video of Reedijk’s XT 3D Printer below as well as some additional photos.