Max Ho of the University of California recently published his dissertation, ‘Magnetic 3D Printing of Hexaferrite Material,’ exploring the use of progressive technology and materials, and the potential in possible applications like miniaturization and circulator integration. Ho chose 3D printing as the technology of choice because of the ability to fabricate complex technologies with the addition of magnetic material.
For this study, Ho chose hexaferrite particles due to ‘strong magnetocrystalline anisotropy and low conductance,’ able to rotate to the field direction rather than changing direction. The research team created hexaferrite particles and a liquid polymer, SU8.
“3D printing of this composite with poling will make direct printing of magnetic components that require out-of-plane and in-plane anisotropic magnetization possible,” explains Ho.
Millimeter wave, an electromagnetic spectrum, corresponds from 30 to 300 GHz—a regime that is ‘ideal’ for both satellite and covert radar communications.
The communication systems would use radio frequency (RF) transmit and receive (T/R) modules to boost output power, establish system noise figure for receiving, along with offering beam steering control. The use of a single antenna would be best in this scenario, with a circulator controlling signal flow.
Magnetic components are required for millimeter wave systems, and the modules are created with:- Monolithic microwave integrated circuits (MMICs)
- Circulators
- Isolators
- Inductors
3D printing has proven itself useful and versatile in terms of magnetic composites, along with other materials:
“A class of smart materials known as magnetorheological elastomer, composites of polymer and magnetic materials, has been fabricated via traditional techniques and only recently by 3D printing. Prior research has demonstrated printing magnetic composite and poling it in the plane of printing [16], [17], where poling is the act of setting the magnetization of the composite in a desired direction. The same concept and technique can be applied to different magnetic materials, such as hexaferrite,” Ho said.
The team used FDM/FFF 3D printing, selecting a Hyrel M30 printer. Thermoplastic filaments can be used, along with liquid or gel composites. While there are many obstacles in using hexaferrite, a blend of particles and photoresist has been found to work in prior studies—but the research team here thought the use of 3D printing would make the process even more versatile than with the use of traditional methods. And while they were able to meet their goals, Ho states that ‘there is always room for improvement.’
Ho suggests the use of single domain hexaferrite particles, or the possibility of replacing the polymer matrix with less solvent, along with in situ poling.
“This technique of 3D printing with a composite of magnetic material in a polymer matrix has a broader range of application beyond just millimeter-wave magnetic devices. Either the magnetic material or the polymer matrix can be changed to different varieties, depending on the application,” says Ho. “For example, the magnetic particles can be made of NdFeB, which would have very high magnetization and suitable for low-frequency applications.
“The polymer matrix can also be changed from SU8 to silicone-based polymer or PDMS, which is not photosensitive. If the composite meets the requirements outlined in Chapter 2, it can used in a 3D printer of FDM/FFF-type.”
Composites and other materials with the use of magnetics are growing in popularity within 3D printing, for everything from use in microgravity to sensors, functional assemblies for medical devices, and more.
What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.
[Source / Image: ‘Magnetic 3D Printing of Hexaferrite Material’]