It’s not just the small parts that lend themselves to being 3D printed – not when you have a big 3D printer. BigRep, as its name suggests, is known for large-scale 3D printing, and it recently saw its BigRep STUDIO 3D printer play a role in prototyping an exhaust manifold, as part of research BigRep is conducting with Polymertal. The exhaust manifold is a large part that connects to each exhaust port on the engine’s cylinder head and funnels the hot exhaust down to a single exhaust pipe.
To do so, they 3D printed a large manifold using the BigRep STUDIO. The STUDIO was developed in response to customers who wanted something a bit smaller than the company’s BigRep ONE, but with the same capabilities. It’s still plenty big, with a build size of 500 x 1000 x 500 mm, but a bit more reasonable, and was perfect for prototyping something like an exhaust manifold. The part was 3D printed in 15 hours using PLA and PRO HT filament, and then coated with 20-micron-thick nickel in a direct metalization plating process. The material cost was less than €20.
As we’ve seen, plating 3D printed parts using Polymertal’s technology creates light, strong objects. Plating the manifold gave it increased heat and chemical resistance, as well as increased strength. Manufactured quickly and at low cost, the part had mechanical properties similar to a finished part, making it suitable for real functional testing. The quality of the part and the speed at which it was manufactured gave BigRep and Polymertal confidence that the combination of 3D printing and metal plating can be used for faster, improved testing of other new automotive component designs.
With tens of thousands parts in an average car, there’s a lot of room to experiment, and automotive manufacturers could benefit from the time and cost savings that 3D printing prototypes allows. In particular, a hybrid approach like that used by BigRep and Polymertal is useful because it produces a prototype that’s close to the final part, allowing for not only faster and cheaper production but more effective testing.
Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below.
[Images courtesy of BigRep]