While there are several smoothing post processing materials on the market, ultimately the most commonly used is good old fashioned sanding. Someone who knows what they are doing can create some amazingly smooth surfaces, but to put it lightly, it is a bit labor intensive. But the solution to giving 3D printed parts an injection molded smooth surface may lay with 3D printing material manufacturer Polymaker and their new PolySmooth filament and Polysher desktop smoothing machine. Together these products are capable of transforming a 3D printed part right before your eyes, and you won’t have to do a thing.
“For extrusion-based 3D printing, the poor surface quality has always been a prominent disadvantage which separates 3D printed parts and parts made by conventional manufacturing methods. What we want to do is to bridge this gap, bringing 3D printing to the realm of making final products, not just prototypes,” said the President of Polymaker, Dr. Xiaofan Luo.
PolySmooth PVB filament has been specially formulated to produce less striation than other filaments, but can still be used on just about any desktop 3D printer that is capable of using standard PLA. The PolySmooth filament can be used for a wide range of applications, and it has the capacity for excellent printing detail and high mechanical properties. It is available in eleven different colors, including white, pink, red, teal, yellow, green, blue, natural, beige, gray and black. Additionally, it has been optimized so it can be smoothed quite easily when exposed to common alcohols like isopropyl alcohol or ethanol.
“The Polysher was designed with simplicity in mind. The machine does not try to hide its inner workings and components – in fact it proudly displays them with its transparent PC shell and rotating plate, you can see the magic happen and see your 3D printed part transform in front of your own eyes,” Aaron Jennings, the Designer & Marketing Manager for PolySmooth and the Polysher, explained to 3DPrint.com.
“The Polysher may be simple in its design but its potential applications are incredibly diverse – from creators of cosplay using it for masks and outfits, to industrial designers getting their prototypes without spending hours sanding and even engineers applying their polished print to create molds with flawless surface quality. I believe that this is only the beginning of what is possible,” Jennings told 3DPrint.com.
The simply designed Polysher is very easy to use, and the smoothing action is entirely automated. Simply place the 3D printed part in the chamber, set the timer and the model will start to smooth right away. Once the polishing process is complete, the drying system will dissipate the alcohol mist and the part will quickly start drying. In about a minute, the Polysher can be opened and the drying plate will raise smoothed part to the top so it can be easily removed from the chamber.
Here is a video of the Polysher in action:
The Polysher uses commonly found alcohol that can easily be obtained from any supermarket or hardware store, so there are no special, complicated or expensive materials needed. Polymaker will be launching a Kickstarter campaign for PolySmooth and the Polysher on April 25, and once fully funded they expect to start shipping in September, 2016. You can find out more about PolySmooth and the Polysher, as well as keep updated on the status of the Kickstarter campaign, on their website. Are you thinking about backing this campaign? Discuss in the PolySmooth 3D Printing filament forum over at 3DPB.com.