The process, which was developed in cooperation with Bauer Technologies, allows for mass production of small metallic parts with certain details that could not be produced by SLM or binder jetting powder bed technologies.
“Screen printing is a highly promising process for the manufacturing of small, precise and cost effective metallic parts with closed structures,” explained Sebastian Riecker of Fraunhofer IFAM, the Insitute for Manufacturing Technology and Advanced Materials. “The advantages of this technology is that it enables the production of complex structured parts and many different parts simultaneously. We can use it to shape structures down to a micrometer scale and for applications in various materials systems. The process also offers a high aspect ration and high reproducibility which makes it ideal for mass production.”
Judging by what was on display at the Fraunhofer stand, the advantages do not end here. Riecker showed a set of closed channels for heat exchangers with spaces and walls so thin that would be very difficult or impossible to reproduce by metal powder bed based processes. The final piece does require a heat treatment but no post processing and the surface quality is as close to final shape as it gets.
The cell diameter goes as low as 0.1 mm for any user defined size, while cell height goes from several millimeters to a few centimeters (the technology is not ideal for very tall parts). Wall thickness can easily go as low as 50 micron (with a maximum of 1000 micron).
Examples of applications span across all fields where AM is generally implemented, including aerospace, energy management, precision mechanical engineering, electronics and automotive. These include fuel cell components, catalyst carriers, high precision lightweight construction, micro mechanics, heat exchangers and insulation, electrodes, bioimplants and even jewelry.
More and more, 3D printing is shaping into a “state of mind” rather than a technology, with new approaches appearing that cannot be replaced by any other approach. The number of technologies is multiplying rather than consolidating into a few dominate processes and that is because 3D printing is not just a new manufacturing technology but rather an entirely new way of making things, all things. That’s what they do at Fraunhofer.