“With time-to-market cycles shorter than ever and production quantities dropping, our customers are now looking for solutions that enable them to deliver prototypes quickly and cost-effectively. Compared with conventional metal or aluminum inserts, our new approach offers molders the flexibility to quickly produce and switch inserts, making them much more productive and profitable. Combining our longstanding heritage in mold making with Stratasys’ pioneering expertise in 3D printing injection molds, this best of both worlds technique is the future of prototype and low volume production,” said Dirk Paulmann, HASCO’s Executive VP of Sales & Business Development.
The injection molds are 3D printed using a Stratasys Objet500 Connex 3D printer, with the molds themselves being printed using their super-durable Digital ABS material. In addition to being one of the most advanced, multi-material 3D printers on the market, the Objet500 Connex is also a remarkably fast printer. By 3D printing molds rather than milling them from aluminum the time required for the mold production process can be dramatically reduced, allowing for quick and inexpensive adjustments to prototypes and molds. When the molds are combined with the K3500 Quick-Change Mold System, HASCO says that it sets a new low-cost benchmark for prototyping and low-volume injection molding.
“The speed of the process was incredible. Using our Objet500 Connex 3D Production System, we produced the parts of the cavity that shape the polymer – such as the inserts and slides – in just six hours compared to the 24 hours it previously took. Through the use of tried-and-tested standardized HASCO products and Stratasys state-of-the-art 3D printing, the project has proved that it is possible to implement this innovative rapid-technology application within the injection molding process. For the production of low-volume prototypes in the final product material, the ability to quickly change molds with a 3D printed cavity offers a rapid, low-cost alternative to conventional methods,” Paulmann confirms.
HASCO stumbled on the process almost accidentally while producing a sealing plug using its industry-standard A8001 clamping fixture. Because of the geometry of the screw required it simply could not be produced using conventional injection molding processes. But because the Stratasys Objet500 Connex is capable of extremely fine detail on objects with complicated geometries, HASCO was able to redesign the screw mold at the correct size and wall thickness without any problems. The company 3D printed several new mold inserts to test and verify the integrity of the design. Once the 3D printed molds proved themselves to work as expected they happily moved on to the mass production phase.
You can find out more about the K3500 Quick-Change Mold System on the HASCO website. And you can find out more about the Stratasys Objet500 Connex 3D printer here. Let us know your thoughts on the future role of 3D Printing within the injection molding space. Discuss in the HASCO forum thread on 3DPB.com.