The VolgoBot 1.0 is an FFF-based 3D printer that features a build volume of 200 x 200 x 250 mm, and the ability to print with a minimum layer thickness of just 0.04mm in PLA, ABS, Nylon, PET and flexible filaments.
“The main objective of the project was to develop a model of professional printer, which would be the best in its price range, so we used the best components and the best materials for this purpose,” the founder of VolgoBot, Mikhail Kozenko, explains. “The printer is designed with a clean slate, so many common problems such as: jams in the extruder; the inability to print FLEX rubber-like materials; overheating of the electronics; insufficient and uneven cooling of the printed parts; design flexibility of the printer; inconvenience coil arrangement with consumables, and many others were taken into account at the while it was developed.”
The printer is actually quite a reliable and durable machine, according to Kozenko, and they are currently undergoing internal testing within the company. Currently the beta version of the VolgoBot 1.0 is available for purchase for just 47,000 Russian Rubles (approximately $700), although the final version will be priced at around 70,000 Rubles (approximately $1040).
Some additional specifications of the printer can be found below:
- Print technology: FFF (Fused Filament Fabrication)
- Dimensions (mm): 380 x 380 x 420
- Working area (mm): 200 x 200 x 250
- Minimum layer thickness (mm): 0.04
- Consumables: PLA; ABS; Elastic; Nylon; PET
- Diameter of filament used (mm): 1.75
- Printer body: Structural steel
- Firmware: Marlin
- Software: Cura, Repetier-Host
- File formats: .stl; .obj
- Power Consumption (W): 200
- Weight (kg): 19
VolgoBot also plans to offer exceptional technical support to their customers, providing them with peace of mind should they have any trouble setting up or running their machines. While there are plenty of similar machines on the market today, the VolgoBot 1.0 seems to have what it takes to grab a bit of the market share in Russia, where the competition for 3D printer manufacturers is not quite yet where it is in the United States or Western Europe. What do you think about this new 3D printer from Russia? Discuss in the VolgoBot 1.0 Forum thread on 3DPB.com. Check out the videos below to see the VolgoBot 1.0 in action and get a closer look at the machine itself.