We’ve all heard the phrase, “it’s not rocket science” to indicate something that isn’t particularly difficult to figure out. And you may have been told that 3D printing “isn’t rocket science” either, but sometimes it quite literally is. In this case it’s 3D printing that took place as part of the ultimate space agency and last word in rocket science: NASA. For their most recent foray into space based awesomeness, they have created a 3D printed turbopump. Now, I have to admit I did not know exactly (or even vaguely, actually) what a turbopump does. I, after all, do not generally engage in rocket science. However, the folks at NASA have a very good idea what one is and I take their word for it:
“is a propellant pump with two main components: a rotodynamic pump and a driving gas turbine, usually both mounted on the same shaft, or sometimes geared together. The purpose of a turbopump is to produce a high pressure fluid for feeding a combustion chamber or other use.”
Now, this isn’t the kind of thing you can just casually toss off the block and hope that it works. Its creation took a total of two years, but if that seems like a lot, without the availability of 3D printing, it is estimated that it would have taken at least four. So, if you’re doing the math, that’s 55% fewer parts in 50% of the time…and that’s a pretty big improvement.
“By testing this fuel pump and other rocket parts made with additive manufacturing, NASA aims to drive down the risks and costs associated with using an entirely new process to build rocket engines.”
Imagine that. Pretty soon they might be able to print a rocket ship and if the reduction in material and costs adds up to the savings they have seen with the turbopump there could be a lot more space exploration at a much smaller price tag. It probably won’t bring the price down enough where you and I will be able to afford tickets to the moon, but discounts are hard to come by in space travel.
Let us know your thoughts on NASA’s continued use of 3D Printing in the 3D Printed Turbopump forum thread on 3DPB.com.