Imagine a collapsed building that has been reduced to a pile of tangled rubble, steel beams and debris. Now try to imagine how many living people may be trapped under the thousands of tons of that collapsed building, clinging desperately to life. How will you reach them? How will you even know where they are?
But imagine a small robot that can squeeze itself into the gaps, crevices and cracks of piles of rubble. A robot that can shift its actual size, expanding when it needs to, and constricting when things get tight. That is the concept behind the OctaWorm, a small, deformable octahedron robot that is capable of exploring and negotiating all sorts of spaces that most traditional rescue robots are incapable of traversing. The project is the result of an international collaboration between the University of Chile and the University of Akron, and OctaWorm itself was designed by Juan Cristóbal Zagal.
As the director of the robotics laboratory at the University of Chile in Santiago, Zagal is charged with creating and developing new types of robotic mechanisms and technology. The goal of the OctaWorm project is to develop a new way to use robotic motion to access and navigate confined spaces such as cracks and voids found in disaster environments, as well as pipes and air ducts. Zagal also envisions tiny, future versions that can be used for medical applications, such as navigating inside of the human body. Although robots of that size are quite a ways away from the current prototype, the design is remarkably scalable.
Check out this video of OctaWorm working its way through a pipe:
“The current version of the robot is capable of traveling inside a pipe. It is also capable of dealing with changes on the internal diameter of the pipe. The functional symmetry of the robot allows it to travel along T, L and Y joints in pipelines. Traditional in-pipe robots have many problems for dealing with these types of junctions. In contrast the deformable octahedral robotcan simply squeeze into junctions,” Zagal told us via email.
The OctaWorm that you see in the video is the third prototype of the deformable robot, and it has gone through a lot of changes since Zagal and his team’s first attempt. The first two iterations of OctaWorm used syringes to move the joints into place that were run with small hydraulics while the joints on the second used electronic actuators. The current version upgraded the joints to much more reliable pneumatic driven servo motors. While the robot currently is operated via a wired controller created by Zagal and his University of Akron partners Jeff Davis and Daniel Deckler, eventually OctaWorm will be controlled wirelessly.
“The use of 3D printing was critical for producing joinery parts that allow connecting the linear actuators. We also used 3D printing for producing high definition ball joints. The ball joints were fabricated using a Stratasys Objet 3D printer. The remaining 3D printed parts were produced with an FDM 3D printer,” Zagal explained.
Just imagine rescue workers equipped with an army of OctaWorms, each outfitted with an infrared camera and medical equipment. They could be set loose in a disaster area and explore the ruins looking for signs of life. A fleet of small, inexpensive OctaWorm robots could potentially save countless lives that could otherwise be lost while waiting for rescue workers to find them by randomly digging through rubble. They could even be outfitted to carry small parcels of water or medical supplies to help trapped survivors last long enough to be saved.
You can read more about the OctaWorm project over on Juan Cristóbal Zagal’s website, and make sure that you let us know what you think of this new pipe-crawling robot over on our 3D Printed OctaWorm Robot forum thread at 3DPB.com.