Creating these types of custom made figures requires a great deal of painstaking attention and artistry – they aren’t just stamped out by the hundreds or thousands. GeeWhiz offered some insight into the behind-the-scenes process of creating an award-winning figure like this one.
The team began by creating the armor, head, feet, and utility belt in Maya and then refining the forms in ZBrush. These computer models were then printed using a high-resolution 3D printer. After their printing, they were trimmed, patched, and sanded by hand to prepare them for the creation of a mold. The mold is then used to re-cast the part into either rubber or ABS plastic, depending on the part.
Each piece is painted either using a small paintbrush and airbrush masking techniques. This combination of applications creates the metal and carbon fiber effect. Acrylic paints were finished with an automotive topcoat giving them depth and sheen.
Aquino described the challenges present in the creation of such an elaborate and complex custom figure:
“Building a custom figure is a painstaking trial and error process which often results in having to start from scratch to finally get all the parts and pieces to properly fit together. In such a small scale, all these parts require very nimble hands and a whole lot of patience to cast, mold, sand, paint, cut, tailor, and assemble.”
There’s more to this figure than plastics and hard surfaces, however. GeeWhiz also custom tailors clothing for its figurines. In this case, Aquino worked with tulle, netting, spandex, and faux leather to create a tight-fitting undersuit. Each piece not only has to fit perfectly with the other pieces of the pattern, but also had to sit exactly right with the armor plates. This means that not only are all of the sizes scaled to 1/6 but also the thicknesses of the materials is decreased to 1/6 and then all of it has to be sewn together perfectly.
You can visit GeeWhiz’s Facebook page to view images of the custom figures and clothing they have created over the years, ranging from Bill the Butcher, complete with all his knives, to Dr. Who. It’s really quite impressive. Leave your feedback of this amazing work in the 3D printed Dark Knight forum thread on 3DPB.com.