Over the years the case mod contest has produced some amazing entries, ranging from the artistic, to the high tech to the just plain weird. There has been multiple LEGO cases, a life sized R2D2 computer case, a case that looks like a BBQ and even a retro boom box case. As Quakecon grew into one of the most popular gaming events of the year, the case mods only got bigger and more elaborate.
Owen designed his tank case in Sketchup entirely on his own from reference photos that he found online, and many of the parts would need to be designed and printed several times. Just the tracks alone required several months of designing, testing and redesigning until they worked correctly. Each of the tank’s treads have over 200 individual parts, including 200 handmade pins to hold them together. Owen printed all of the case parts out in ABS, and he estimates that it took him well over 300 hours of printing time to complete his build. Although he believes that he could cut that down now that he has worked all of the design kinks out, and he’s even uploaded all of the 3D files to Thingiverse so anyone can try to build their own.
Here is a brief video of the tank case in action:
The tank tracks are driven by two electric rock crawler motors connected to a fully 3D printed transmission. The motors are powered by two lithium batteries and produce enough torque to easily move over twenty pounds without any issues. The turret is also fully functional and can rotate almost a full 360 degrees and tilt up and down. And there is still a powerful CPU inside of the RC tank, including a working cooling system and a camera.
“Using the software on my phone, I can access the camera from anywhere with internet access and control the turret functions remotely. Going back to the point of this build, the Tiger I houses a complete computer system with an Asus mini-ITX motherboard, Intel i7 4770K CPU, 550 watt Cooler Master power supply, and an EVGA 750ti video card. The PC is fully functional and can play any game I’ve thrown at it, including World of Tanks,” Owen explained via email.
Here is a video of Owen explaining the computer specs and case build process:
His first tank case mod won first place in the recent Quakecon fabrication category, but he still wasn’t content so Owen stripped the parts down and started to built it again. He decided to use higher quality Cooler Master parts and intends to enter the finished case into the Cooler Master Case Mod World Series event. His finished tank looks even better than the original, and will most certainly attract a lot of attention. You can read his detailed build log, including dozens of pictures over on the Cooler Master forums. And you can let us know what you think of Owens tank case mod in our 3D Printed RC Tank PC forum at 3DPB.com.