Bergen is the second most highly populated city in Norway, having been surpassed by the capital Oslo only in the 1830s. It was founded in the 11th century most likely as a trading post and is, therefore, rich with history. It occupied a highly important place in the history of Norway as the site of battles, political maneuvering, and extensive trade. As such, it is home to a large number of historic buildings and, in fact, the area near the wharf known as Bryggen is a UNESCO World Heritage Site.
At the Rothaugen school in Bergen, eighth grade students are being introduced to cutting edge technologies through the Innovative Learning Project. The students enrolled in the class were divided up into groups and sent off to research local architectural history. This started, in a relatively low-tech fashion, with a visit to the library where students looked at actual books. Poring over printed material, they collected images and descriptions of the way their town looked in 1814.
The year 1814 was chosen for the project because the Norwegian Constitution was instituted on the 17th of May 1814, making it the oldest prevailing constitution in Europe. As the students learned about the history of Norway, an examination of the physical form of their city became an ideal mechanism for bringing together the content of their courses with an introduction to advanced technology.
The excitement and enjoyment of the process is clear on the students’ faces as they watch their hard work become a reality. The students each describe their experience working on the project in the video at the top of this article. One of the things that the students learned is that as magical as 3D printing is…it’s not magic. It takes a lot of hard work and a lot of time to move the visions in your head through the process required for it to be 3D printed.
“Printing one building can take a lot of time,” said student Henriette Aasen Garmenn. “Each building takes about 1 1/2 to 3 hours. The whole class did 19 buildings. We had groups and each group made a building.”
In this, we see yet another example of the way in which 3D printing works with history rather than against it. Although there is always the fear with any new technology that it is somehow erasing the past, it seems that here students are more connected than ever as a result of the role it played in making history real.
Let us know your thoughts on this innovative way of bringing together past and present in the 3D Printing Bergen forum thread over at 3DPB.com.