Fonon Corporation says their additive manufacturing fiber laser devices feature improved laser management practices capable of fine-tuning product density and reducing build rate cycle times.
Fonon’s Direct Metal Laser Sintering (DMLS) process prevents fluctuations in laser power during operation, which adversely impact quality control management of density, while their high-frequency laser provides, according to the company “a flat, uniform power density ensuring that the metal powder materials used are melted with no variation during the build cycle.”
Fonon develops each of their 3D DMLS printing systems specifically for the requirements of each individual customer. Their design allows customers to optimize their consumption of what are generally very expensive nano powders.
Fonon devices feature build plate sizes – using the company’s proprietary Scalable Reach Technology – in ranges from 500 x 500 mm to 4000 x 2000 mm. Fonon says their building block technology for 3D metal printing systems can extend to end-user applications which include manufacturing automotive engines or turbine blades and tooling large-volume production systems that are currently limited to typical build plate sizes of 250 x 250 mm.
They say their process also reduces inert gas flow rates. They define the optimal laser power requirements in relation to specific applications.
“We solely develop all 3D Direct Metal printing systems for specific customer requirements, targeting maximum performance for 3D printing of specialized designs, parts and applications,” Fonon says. “Our designs allow customers to optimize expensive nano powder consumption, reduce inert gas flow rate, optimize throughput verses surface roughness, minimize powder fill up volume in the process chamber, define optimal laser power requirements, optimize system costs in relation to application (design for the warhead 3D metal sintering system is different from the design of medical contact pads mold forms prototyping, even if they have the similar horizontal cut dimensions).”
The company’s 3D Metal Fusion Technology is complemented by 3D engraving capabilities via their Zero Width Laser Cutting Technology.
Have you ever seen one of the industrial-grade Fonon Corporation DMLS printers at work? Let us know in the Fonon DMLS AM Systems forum thread on 3DPB.com.