Sometimes I wonder what Tesla would have contributed to society if he were to still be alive today. What would he think about today’s super computers, smartphones, tablets, and LED lights? What would his reaction to 3D printing be, and how would he use it to aid in his inventions?
Unfortunately Tesla passed away 72 years ago, and he never had the opportunity to see a 3D printer. However, one man, named David Choi, has taken some of Nikola Tesla’s contributions and combined them with 3D printing.
“Nikola Tesla’s life and experiments have always intrigued me,” Choi tells 3DPrint.com. “After seeing Tesla Coils light up fluorescent and incandescent bulbs without wires, I was enthralled. I even named my cat Tesla.”
Because of his love for Tesla, Choi wanted to create something using today’s modern 3D printing technology, based on inventions discovered by Tesla. His creation, called the ‘Wirelessly Powered Tesla Desk Lamp,’ is quite the unique piece.
Printed on his MakerBot Replicator 5th Generation 3D printer, the lamp operates at 6.5MHz, and is optimized to power a vintage 25W Tesla light bulb.
“The design started with the base of the lamp which is the most critical part,” Choi tells us. “It consists of two separate coils that are inductively coupled to each other. One coil is a spiral form and is capacitively loaded and tuned to resonance. The second coil is simply a loop that follows the circumference of the spiral inductor. 3D printing the base made my life incredibly easy. I first performed calculations to create an inductor that would match with my load (the bulb). Then all I had to do was lay the 1/8″ copper tubing into the spiral form. The rest of the lamp, from the legs to the top have no real geometrical features that present itself in the circuit. It was purely aesthetic, including the vintage Tesla commemorative bulb used.”
The receiver is actually the lamp’s base. It includes a spiral-wound, capacitively loaded coil as well as a secondary, single loop coil. The spiral shape creates a flat inductor that can be used for many applications, while the single loop is directly wired to the light bulb itself.
The lamp has four coils which it uses, and the power is inductively transferred through magnetic coupling. The first coil is the primary transmitting coil, and it transmits power to the large secondary receiving coil which stores large amounts of reactive power when it is tuned to resonance. The third coil is the aforementioned spiral-wound coil which is tuned to resonance as well. The fourth coil is the single loop which picks up the fluctuating magnetic field of the third coil, and in turn provides power to the light bulb at 6.5MHz.
The coils are all made with a variety of copper tubing, and the transmitter was built using a dual RF MOSFETs (MRF150).
“I am perfecting a previous design of mine which uses one transistor only, essentially halving the cost of the transmitter,” Choi tells us. “The circuit I used is an induction heater circuit but tuned to a much higher frequency so it is safely incapable of heating common metals through magnetic induction.”
For those of you interested in creating your own wirelessly powered Tesla desk lamp, you can download the STL files for the 3D printed parts on Thingiverse, print them out, and then assemble your own version of this incredible lamp.
“I intentionally chose a vintage Tesla bulb reconstruction as a commemoration for his work in wireless power transmission,” explains Choi. “Were I to have chosen an Edison or Marconi bulb, Tesla would be rolling in his ashes.”
What do you think? Do you like Choi’s creation? Will you be attempting to create your own lamp? Discuss in the Tesla Desk Lamp forum thread on 3DPB.com. Check out the brief video demonstration provided to us by Choi below.