The Food and Drug Administration has a responsibility of protecting the public’s health, by assuring the safety of drugs, medical devices, and food supplies. Often times people forget that their other responsibility is to 
In just the last year alone, we have seen a tremendous amount of innovation within the field of medicine, thanks in part to the rapidly expanding 3D printing market. 3D printers are being used to create both internal and external medical devices, saving lives, and bettering the lives of literally thousands of people each year. At the same time though, the FDA has to assure the public that the medical community will not abuse this technology, putting our health at risk.
A notice dated May 14th, and written by Leslie Kux, the Assistant Commissioner for Policy for the FDA, has announced a public workshop to discuss the technical considerations of 3-D Printing, which will take place on October 8 and 9, 2014, from 8 a.m. to 5 p.m. The premise for the discussion, titled, “Additive Manufacturing of Medical Devices: An Interactive Discussion on the Technical Considerations of 3-D Printing”, is to gather comments from additive manufacturing companies, and medical device manufacturers on the problems, and solutions to those problems, that 3D printing will bring to the table. The workshop will be held at the FDA’s White Oak Campus, 10903 New Hampshire Ave., Bldg. 31 Conference Center, the Great Room (Rm. 1503), Silver Spring, MD. For those who wish to comment on the discussion at hand, but can’t make it to the campus, they will be able to submit comments electronically at regulations.gov.
The goals of this workshop, that the FDA hopes to achieve are as follows:
Understand
It is very important for those within the industry as well as those working for the FDA to understand the technology as well as the problems and challenges that lie ahead. 3D printing is a relatively new technology, thus there are numerous issues which may not have even been considered yet.
Create Awareness
As a group, the participants of this workshop will be able to collaborate on solutions to any problems which may be present, and develop the best practices to ensure the safety of 3D printed medical devices.
Coordinate/Promote
Innovation is one of the FDA’s main goals. Through this workshop, they seek to establish processes which will ensure performance and reliability of 3D printed devices. They also seek to spark collaboration between those within the industry, on developing educational materials, standards, and guidance.
It will likely be a couple of years before any regulations emerge, stemming from this planned public discussion. Creating regulations which are fair, balanced, and most importantly protect the public, can be a long process. Hopefully the FDA ultimately finds a middle ground between overregulation, and turning a blind eye. Share your opinions on what the FDA’s job should be in regulating 3D printing at the FDA forum thread on 3DPB.com
