Champion Motorsport builds a line of aftermarket performance products for Porsche automobiles, and their line includes turbo inlet ducts for the Porsche 997.
The 997 comes straight from the factory as a very, very fast machine. A number of American automotive publications say turbo models can go from 0 to 60 in around 3.4 seconds and they can reach a top speed of 180 mph. But for some people, that’s just not fast enough.
Naveen Maraj, the President of Champion Motorsport, says his company develops its own brand of ultra-light wheels and carbon composite intakes. The company’s in-house engineering team designs, engineers, develops, and tests the exhaust products at their 22,000-square-foot complex in Florida.
But the team at Champion found that they were frustrated when it comes to traditional manufacturing methods. There were confronted with a Hobson’s Choice; sacrifice either optimum air flow or pleasing aesthetics.
So the engineers at Champion turned to 3D printing to create “soluble molds” to build their intakes.
The problem was that conventional tooling methods failed to produce a duct that was both perfectly smooth on both the interior and exterior surfaces. The previous methods of construction meant ducts were molded in two parts and then bonded together. That meant the part would be weaker than a duct made of a single piece.
So Chris Lyew, the lead mechanical engineer at Champion, says his team used the Stratasys Fortus 3D Production System and an FDM-based Stratasys 3D printer to take on the task of molding the carbon fiber by producing FDM soluble cores.
The molds they came up with can be wrapped 360º in carbon, eliminating the need for any seams in the finished part. Builders use a solution to help remove the mold, and it leaves behind a perfectly smooth pipe. Lyew called it “the magic recipe.”
“At the end of the day, the FDM technologies – they save us time; they save us money,” says Louis Malone, the Technical Director at Champion Motorsport.
Custom car and motorcycle buildings are using 3D printing processes to give their vehicles aesthetic beauty and a performance edge. Do you know about any car or motorcycle companies who’ve made something out of the ordinary with 3D printing? Let us know in the Making the Porsche 997 Faster With 3D Printing forum thread on 3DPB.com.