Among its many applications, 3D printing plays the exciting role of filling in mysterious gaps in history, giving actual form to things previously only imagined. That’s the case with the centerpiece of a new exhibition on the tragic 1845 expedition of Rear Admiral Sir John Franklin: the full-scale, 3D printed replica of the ship’s bell from the HMS Erebus.
On May 19, 1845, Franklin and his crew of 24 officers and 110 men on the two ships, HMS Erebus and HMS Terror, both modern in their day
Later, it was determined the two ships and their respective crews spent the winter on Beechey Island, part of the Canadian Arctic Archipelago of Nunavut, Canada in the Wellington Channel. The ships were evidently moored to an iceberg. The ships became trapped in ice off of King William Island in September of 1846 and were never freed. A note found later on the island indicated that Franklin died there on June 11, 1847. The entire crew perished as well. American and British searches looked in vain for the two ships.
In September 2014, the Canadian government announced that researchers had located the HMS Erebus in its final resting place on the seafloor. Evidently, Inuit elders in the area had known of the ship’s location there for years. It is almost certain that Franklin had been on that particular ship. The HMS Terror has not been located.
While much of the HMS Erebus has suffered from decay, the brass bell is surprisingly still completely intact and has been used to create its full-scale, 3D printed replica. The bell was discovered on the deck of the Erebus and features a date stamp of “1845” as well as a property mark particular to the British government.
Franklin’s expedition is considered an important episode in Canadian history and thus the exhibition — and its 3D printed starring object, the bell — is expected to draw thousands of visitors to the Royal Ontario Museum in Toronto, Canada. The exhibition will actually travel to seven museum throughout Canada. One of the exciting aspects of the discovery of the HMS
The 3D replica is remarkable in its fidelity to the HMS Erebus’ original brass bell, resembling the state in which it was found rather than the way it must have looked when it was new. It isn’t clear how the replica was produced but the 3D printed object is impressive and convincing.
Let us know what you think of this replicated piece of history over at the 3D Printed HMS Erebus Bell forum thread at 3DPB.com. Additional information on this story can be seen in the video below: