Life3D has released a design for a 3D printed capsule capable of carrying a camera as a payload attached to a weather balloon. All of this, of course, assumes that you have access to a weather balloon — which, until I read this article, I had always sort of assumed were the property of governments and evil geniuses, but apparently are quite readily available. The capsule is designed to hold what is known as an ‘action sized’ camera (such as the GoPro) and a GPS device (important if you ever want it back) and still has enough room to be insulated. Once assembled, the capsule is watertight and buoyant so it won’t simply disappear to a muddy depth if it lands on the water.
The designer of the capsule is Life3D’s Director, Tristan Schoonraad, who is based on London and lists his profession as ‘work in the movie industry.’ Schoonraad brings two decades of experience in the film industry in the area of special effects, make-up, and props in a number of high profile films. He has cast and molded everything from humans to monsters and is an acclaimed artist who goes by the name ‘Schoony’ in that persona.
On Wevolver, a website almost too cool to understand, you can either download the capsule’s STL files for your own printer. You can also have Shapeways print the pieces for you. Then, all you need to do is check with your local regulations regarding the launching of weather balloons and, assuming the regulations aren’t in the nature of ‘never launch a weather balloon’ you are all set to begin your high altitude film making.
Are you interested in this sort of project? Let us know if you think Life3D’s capsule is a good way of launching this idea over at the Life3D Weather Balloon Photography forum thread at 3DPB.com.