Researchers from Indonesia and Korea have come together to improve water filtration systems for developing countries especially, releasing the results of a recent study in ‘Three-dimensional, printed water-filtration system for economical, on-site arsenic removal.’
A natural element found on Earth, arsenic is well-known as a toxin for humans in fact, it can damage lungs, the bladder, liver, kidneys, and even cause death. Millions are at risk in countries like China—as well as developing countries—due to contaminated drinking water:
“The threat to public health in developing countries is more serious than it is in developed countries because, in developing countries, household water supplies mainly come from natural groundwater sources, which contain high levels of arsenic; thus, this widespread health risk in developing countries is a serious problem of immediate concern,” explained the authors.
Proposing 3D printing as a potentially affordable and accessible method for filtering arsenic, the researchers state that an automated and reconfigurable device could be created to serve as a ‘chemical-reaction platform.’
Samples were designed in AutoCAD, each with 40mm high exteriors and 30mm outer diameters. Data was transferred to Simplify3D and then the samples were 3D printed on a DeltaBot 3D printer using PLA filament.
Assessments were performed on the 3D printed devices regarding adsorption of arsenic ions to iron oxides. Ultimately, the researchers noted even distribution of iron. No arsenic was found before the filtration, but a ‘substantial amount’ was on the filter surface.
“As the channel width became narrower, corresponding to an increase in the internal surface area of the 3D printed filter, (1) more iron (III) oxide (adsorbent) was deposited on the inner surface of the filter, and (2) the flow rate under atmospheric conditions (without external pumping) decreased,” concluded the researchers.
“A column study was performed to investigate the effect of the internal surface area on adsorptive filtration and showed better arsenic removal in adsorptive filtration. The study also showed that a filter with a larger internal surface area was more effective in adsorptive filtration than one with a smaller surface area. Because the flow rate of the water through the filter can be controlled by the architecture of the filter itself, extra pumping is not necessary. The compact filter presented in this report should serve well as a small-scale water-purification unit that can be easily carried to any site having water contaminated with arsenic.”
Numerous projects in recent years have involved 3D printing in concert with efforts to improve the water supply around the world, from harvesting pure water with fog harps, to using membranes as barriers to contamination, biodegradable filters, and more. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.
[Source / Images: ‘Three-dimensional, printed water-filtration system for economical, on-site arsenic removal’]