3DPrint.com | The Voice of 3D Printing / Additive Manufacturing

3D Scanning and 3D Printing to Fix Bone and Cartilage Defects

3D printing is changing the medical industry in multiple ways, saving lives and reducing pain and complications. Broken or diseased bones are way up there on the list of conditions that can cause a great deal of pain and complications, but they’re also way up there on the list of conditions that are being helped immensely with 3D printing technology. Multiple organizations are working on the development of 3D printed bone that can effectively repair bone defects and damage. If a patient has a piece of bone missing due to an accident or illness, a CT or MRI scan can be taken to get the exact size and shape of the defect, and then a piece of new bone can be 3D printed in that size and shape and implanted through surgery.

It’s still a complex process, but a new study simplifies it, using 3D scanning to create 3D models of damaged bones and then 3D printing new bone or cartilage directly into the defects. A group of researchers from China used the technology to repair three common types of defects: a cube-shaped bone defect, a randomly shaped cartilage defect, and a cylinder-shaped osteochondral defect. Specifically, the three defects being treated were:

Bones with each of the defects, as well as healthy bones, were obtained from animals and 3D scanned using an EinScan-Pro handheld 3D scanner from Shining 3D. The 3D scans were then turned into 3D models using Materialise Magics software, and the models were used to create additional models of pieces that would fit the defects in each bone. The researchers then used a modified Bio-Architect 3D bioprinter from Regenovo to 3D print the repairs directly into the defects. An alginate hydrogel bioink was developed to repair the bone defects, and a modified sodium hyaluronic acid was created to repair the cartilage defect.

Australian surgeons have done something similar by using a 3D bioprinting pen to draw new cartilage directly into the body, but rather than using a pen, the Chinese researchers simply placed the bones on the build platform of the Bio-Architect 3D printer so that the defects were parallel to the build platform, and allowed the 3D printer to print directly into them. The results were remarkably accurate: once the printing was done, the bones were 3D scanned again, as were their healthy, undamaged counterparts. The results of the scans showed that the contours of the repaired bones closely matched those of the undamaged bones.

Of course, such a procedure would be a bit more difficult to perform on an actual person, but the point of the study was to show that 3D scanning and 3D printing are effective ways to replace missing or damaged bone and cartilage tissue. As the researchers point out, current treatments for such defects are expensive, complicated, and often less than fully effective, but 3D scanning and 3D printing were able to fully restore the damaged tissue.

The research was documented in a study entitled “In situ repair of bone and cartilage defects using 3D scanning and 3D printing,” which you can access here. Authors include Lan Li, Fei Yu, Jianping Shi, Sheng Shen, Huajian Teng, Jiquan Yang, Xingsong Wang, and Qing Jiang. Discuss in the 3D Printed Bone forum at 3DPB.com.

[Images: Scientific Reports]

 

Exit mobile version