3D printing can help ease the shortage in other ways besides actually printing entire new organs, however. Researchers from Virginia Tech have developed a new technology they refer to as “microfluidic biopsy,” which involves interfacing 3D printed microfluidic devices with whole organs. The devices conform to the organs and profile their molecular health signatures, or biomarkers. In other words, the devices help to determine how healthy and functional donor organs are.
The 3D printed microfluidic devices developed by the Virginia Tech researchers could potentially allow for better understanding of the health of organs, as they describe in a paper recently published in Lab on a Chip entitled “3D Printed Conformal Microfluidics for Isolation and Profiling of Biomarkers from Whole Organs.”
“Initially and currently our insight is that the surfaces of organs may contain diagnostically relevant soluble molecular information that could potentially be assessed via organ-conforming biomedical devices,” Dr. Blake Johnson, assistant engineering professor and lead author of the study, told 3DPrint.com. “Throughout the process our research team developed new approaches for bonding microfluidic devices to living tissues and achieving conformal matching between biomedical devices and organs.
“The novel 3-D printed device was constructed by light-scanning and reverse engineering of pig kidneys and 3D printing on bio-inspired substrates. Overall, this work demonstrates the promise of 3-D printing for constructing novel biomedical devices for whole organs that could potentially help relieve the organ shortage crisis.”
After the conformal microfluidic devices were 3D printed and cured, they were removed from the plastic organ substrates, sterilized and bonded to the original organs using a thin hydrogel, leaving an open microchannel for procurement of microfluidic samples. They were then 3D scanned again to compare the surface topography of the organs to that of the microfluidic devices.
Once it was established that the microfluidic devices conformed to the surfaces of the organs, multiple techniques were used to take and analyze microfluidic biopsy samples.
“…3D printed conformal microfluidic devices form coherent interfaces with whole organs and can establish controlled fluid flow across the organ cortex, thus serving as a potential sink for continuously isolating molecular species,” the researchers explain.
- Molecular clustering of samples isolated by the conformal microfluidic device differ depending on the ischemic conditions of organ preservation
- Differences among molecular clustering profiles correlate with different levels of biomarker expression
- Samples isolated by the 3D printed organ-conforming microfluidic device contained biomarkers of ischemic pathophysiology and metabolic activity
In other words, the microfluidic samples that the 3D printed devices enabled the researchers to gather provided diagnostic information about the state of the organs that other techniques have not been able to procure. The work established an objective, rather than a subjective, method for assessing the health and quality of potential organs for transplant, and gives medical professionals better knowledge of and control over the state of those organs.
“Ultimately, we are excited by the potential to non-invasively profile health indicators from whole organs using 3-D printed technology as it could provide a paradigm shifting approach for various whole organ science and healthcare applications, such as organ transplantation,” Johnson told us.
Authors of the paper include Manjot Singh, Yuxin Tong, Kelly Webster, Ellen Cesewski, Alexander P. Haring, Sahil Laheri, Bill Carswell, Timothy J. O’Brien, Charles H. Aardema, Jr., Ryan S. Senger, John L. Robertson and Blake N. Johnson.
Below, you can see the flow of fluid through one of the 3D printed devices as it’s bonded to a kidney:
Discuss in the 3D Printed Microfluidic Devices forum at 3DPB.com.
[All images/video provided to 3DPrint.com by Blake Johnson]