Some of the performance-modifying 3D printed parts on McLaren’s new MCL32 race car include:“The ability to rapidly model, build and evaluate new components is an invaluable asset for any fast-moving and dynamic racing organisation,” Eric Boullier, Racing Director of McLaren Racing, told 3DPrint.com. “It has become clear that motorsport’s reliance on rapid prototyping and additive manufacturing, and the ability to radically cut time to market, is increasing. Our partnership with Stratasys will not only increase our output in that area, but also allow us to dynamically explore and utilise the cutting-edge of Stratasys’ new 3D printing innovations and solutions.”
- Rear Wing Flap: this large extension, designed to increase rear downforce, was manufactured in carbon fiber-reinforced composites, with the help of a lay-up tool that was 3D printed on the Fortus 900mc Production 3D printer. The high-temperature, 900mm-wide autoclave-cured composite structure was 3D printed, using ULTEM 1010 material, in three days during the limited testing period.
- Hydraulic Line Bracket: this structural bracket, which attaches to the car’s hydraulic line, was 3D printed on the Fortus 450mc Production 3D printer. While it normally takes two weeks to manufacture with conventional methods, the bracket was 3D printed in just four hours, using carbon fiber-reinforced nylon material.
- Carbon Fiber Brake Cooling Ducts: sacrificial tools were 3D printed to make hollow composite brake cooling ducts, in order to efficiently control brake component temperatures. The wash-out cores were 3D printed with ST-130 soluble material, which was specially developed for this application, then wrapped with carbon fiber-reinforced composite material, and autoclave-cured at high temperatures. The resulting tubular structure has a smooth internal surface finish, which helps maintain the highest level of car and aerodynamic performance by making sure the necessary airflow gets to the brakes.
- Flexible Radio Harness Location Boot: this rubber-like boot joins the harness wires of the MCL32 race car’s new two-way communication and data system, as the first cable distracted the driver too much. Three different designs of the boot were iterated and 3D printed in one day, and the final design was printed on the J750 3D printer, using flexible materials, in just two hours. This quick fix meant that the radio harness assembly was able to be utilized in the first Grand Prix race this season.
What I find really interesting is that the McLaren racing team will actually have Stratasys uPrint SE Plus 3D printers to the track on race days, for on-demand production of jigs and pieces. This will allow the parts to be evaluated immediately during track tests, and races.
The overall goal of the partnership between McLaren and Stratasys is to bring about critically important new car developments at an earlier time, taking ideas to fully realized components in less time.“We are consistently modifying and improving our Formula 1 car designs, so the ability to test new designs quickly is critical to making the car lighter and more importantly increasing the number of tangible iterations in improved car performance. If we can bring new developments to the car one race earlier – going from new idea to new part in only a few days – this will be a key factor in making the McLaren MCL32 more competitive,” said Neil Oatley, Design and Development Director, McLaren Racing. “By expanding the use of Stratasys 3D printing in our manufacturing processes, including producing final car components, composite lay-up and sacrificial tools, cutting jigs, and more, we are decreasing our lead times while increasing part complexity.”
“Formula 1 is one of the world’s best proving grounds for our additive manufacturing solutions,” said Andy Middleton, President, Stratasys EMEA. “As the Official Supplier of 3D Printing Solutions to the McLaren-Honda Formula 1 team, we are working closely together to solve their engineering challenges in the workshop, in the wind-tunnel, and on the track. We believe that this, in turn, will enable us to develop new materials and applications that bring new efficiencies and capabilities to McLaren Racing and other automotive designers and manufacturers.”
Discuss in the Stratasys forum at 3DPB.com.