A maker named Aldric Négrier has designed and built several 3D printers, many of which he has shared on Instructables. Négrier runs reprapalgarve, based out of the University of Algarve, which recently gave us the RGB Steel color 3D printer, as well as a gigantic Prusa-based printer last year. Reprapalgarve, in addition to building and sharing multiple 3D printer designs, also offers 3D printing workshops and a 3D printed selfie service.
Their latest is the RooBee One, an aluminum-frame SLA-DLP printer named for its bright red color. The design is based on two other open source machines: the Cristelia LCD SLA 3D printer and the Vulcanus MAX, and you can build it yourself with some 3D printed parts and inexpensive hardware.
Detailed instructions take you step by step through the construction of the Z axis, an adjustable pan and tilt system, projector fixation components, and other structural elements, many of them 3D printed. The printer’s electronics include an Arduino Mega, a RAMPS 1.4 shield, a micro stepping driver, a NEMA 17 stepper motor, an endstop and a 12V transformer. A diagram illustrates how to wire them together and attach them to the printer. Négrier uses an Acer DLP projector, which provides an adjustable build area ranging from 80 x 60 x 200 mm to 150 x 105 x 200 mm.
You can get a quick visual idea of the process in the video below:
Once the printer is assembled, you’ll need to download the Repetier firmware, configure it and upload it to the Arduino Mega. Creation Workshop software, already configured for the RooBee One, can be downloaded directly from the Instructables page. Then it’s time to add the resin and try out a print – Négrier recommends the Standard Blend resin from Fun to Do, as it’s suitable for a broad range of wavelengths, requires a short exposure time, and has low shrinkage and high chemical resistance. It’s also available in a range of types and colors. You’ll want to be careful, though.
“It is a bit toxic from my experience, so for that reason i have installed a fan on top of the printer in order to guide the toxic vapors outside away from the machine operators,” he advises.
As DIY printers go, the RooBee One looks to be a relatively simple build, especially for an SLA-DLP 3D printer. If you’re not interested in building your own, however, Négrier tells 3DPrint.com that reprapalgarve is also going to be selling it, with the projector included, for €599. It’s an attractive machine, with its striking ruby red color, and reprapalgarve is in the process of adding pictures to the Instructable to demonstrate its printing capabilities. If you try building this printer yourself, be sure to share it with us in the RooBee One forum at 3DPB.com.