The Flexion Extruder, which can be retrofitted to most desktop 3D printers, has been getting positive reviews from customers and is already showing up as a feature of some newly-released printers. Now, just two months after its release, the Flexion Extruder is even better than before, according to Diabase Engineering. The Colorado company has teamed up with Minnesota’s Micro Swiss LLC to develop the Flexion HT, an even higher-temperature – and thus even more versatile – version of the extruder that’s now on the market.
The original Flexion Extruder had such strong appeal because of its capability to print especially soft thermoplastics alongside more typical rigid materials with high quality results. Users of the extruder could count on high-resolution results even with thermoplastic materials of extremely low durometers – but the new Flexion HT enables the printing of an even wider range of challenging materials, including nylons and polycarbonates, at high resolutions.
The enhanced capabilities of the Flexion HT come from an all-metal hot end developed by Micro Swiss. Able to reach temperatures of up to 290°C, the hot end allows the Flexion HT to accurately print with a wider range of filaments than any other FFF/FDM extruder on the market, according to Diabase Engineering – from 85 shoreA urethanes to super-hard, fiber-filled nylons.
“High-temperature capability is something our customers have been clamoring for, so we’re really excited to be releasing the HT,” Diabase Engineering founder Stephen Heston told 3DPrint.com. “It’s a great compliment to our standard product. Now with a dual extruder setup, we can reliably print everything from the softest elastomers to high temp Nylons.”
The hot end combined with the tight control of the Flexion drive system results in a smooth, seamless print job with no risk of degradation to the low-friction barrel liner. Customers will have a couple of options for purchase. Users who currently own a Flexion extruder can purchase just the hot end from Micro Swiss as a single component, fully backward compatible with all Flexion extruders. Within the next week or so, Diabase Engineering will also be launching a full retrofit kit that includes the hot end along with a newly-developed silicone insulation and high heat transfer mounting block.
Customers can also take advantage of the Dual Flexion HT Bundle, which includes both a standard Flexion extruder and a Flexion HT, enabling users to flawlessly print with a full range of materials in dual-extrusion format. The hot end itself is available from the Micro Swiss website now; stay tuned to the Flexion site for further details about the full kit, which will be on sale soon. Discuss further over in the Diabase 3D Industrial Printing forum at 3DPB.com.