Washburn learned about gold from his father, a gold exploration geologist who shared his professional knowledge with his son. After seeing some of the issues his father was having with his gold machines, Washburn was inspired, as an adult, to build a new and improved system for the extraction of the precious metal. His interest in gold didn’t stop there; in fact, it only grew, leading him to pursue the ancient art of gold panning.
While a traditional gold pan is wide, flat and round, the Gold Claw is shaped more like a broom pan, and thanks to Washburn’s engineering skill and extensive knowledge of gold, its shape works directly with the physical properties of gold to isolate it from the other materials in the pan. The way it works is surprisingly simple. As with a traditional gold pan, the panner dips the Gold Claw into the river and scoops up a panful of mud, gravel, and other river gunk, then shakes it. But instead of allowing the water to run out through a sieve-like bottom, the Gold Claw is solid, retaining the water along with the mud and minerals.
Suspended in liquid, the solid materials form layers based on weight. The heavier gold flakes sink to the bottom, while the dirt floats to the top and drifts out of the pan when submerged in the water. The gold, meanwhile, gets caught on a series of ridges and remains in the pan, as this seven-year-old demonstrates:
“I used cad software to design the look and feel, incorporating the technology. Then I had to make a 3D printed prototype to test the weight and balance of the pan,” says Washburn. “Machining and casting would take too long and cost too much. I was able to send WhiteClouds a design and test the part two days later, test and turn another concept. Only 3D printing gave me the turnaround time, the cost, I needed while maintaining the properties of a final part.”
The first two prototypes were printed in sandstone-like material on a 3D Systems ProJet CJP 860Pro, while the production-quality working prototypes were created in rigid plastic on a Stratasys Connex3, in a print job consisting of 2265 layers and taking 19 hours. These prototypes were real world-ready and can be seen in the Kickstarter campaign materials. The final product will be injection molded in Tritan, a tough copolyester from Eastman.
“This project was particularly interesting to me because I grew up in a small mining town in Southern Nevada,” says WhiteClouds Production Specialist Heather Perkins, who oversaw the post-processing of the 3D printed prototypes. “I have done some panning with a traditional pan. Klint’s design is a vast improvement upon the traditional pan. I’m excited to see where this goes.”
The 3D printing involved in this project allowed for the design to go from concept to CAD to in-hand prototype quickly, while also allowing the WhiteClouds team time to work with the intricate design.
“For prototypes, it’s easy to rapidly fabricate your intended design through 3D printing. Because it is such a quick process, if any changes need to be done, it’s a matter of days rather than weeks to see the results,” said Perkins.
“It was one of the largest prints that I’ve ever done in a single piece. When I pulled it off the printer it was surprisingly heavy with all of the support material. Because of the unique shape, there was no way to orient it on the printer without needing great amounts of support material.”
Washburn and the Gold Claw company are trying to raise $20,000 by October 12, and rewards to backers will begin shipping right away. Early bird supporters will receive a Gold Claw pan for $25, half of the expected retail cost, while a contribution of $40 will get early birds a pan plus an accessory kit that includes a vial for storing, a snuffer to transfer the gold from the pan to the vial, a magnifying glass and a scoop. If you miss the early bird period, there are still plenty more rewards that include discounts and special pricing for multiple orders. The Gold Claw is available in green or transparent material.
“3D printing opens the doors for innovators, like Klint, because of its affordability. Inventors are no longer limited by their pocketbooks,” Perkins noted.
Check out the Kickstarter campaign video below, and discuss further in the 3D Printed Panning Device forum over at 3DPB.com.
Podcast: Play in new window | Download