The Russian Foundation for Advanced Research Projects in the Defense Industry (FPI) and the All-Russian Scientific Research Institute of Aviation Materials (VIAM) have teamed up to design a drone that will be powered by VIAM’s 3D printed gas turbine engine. The engine, which was unveiled in June, was assembled entirely from 3D printed parts, according to VIAM Director General Evgeny Kablov.
The engine prototype weighs 900 grams and has 75 kilograms of thrust, according to VIAM, though the thrust may be increased to 150 kilograms without significantly increasing the mass of the engine. VIAM has been working with 3D printing since last year, with their first additively manufactured part coming in the form of a 3D printed combustion chamber swirler produced for aeroengine manufacturer Aviadvigatel. VIAM has intensified their research into 3D printing – particularly metal 3D printing – technology lately, as has FPI.“The engine is made entirely on the basis of VIAM additive manufacturing using new laser sintering technology and metal powder mixes for heat-resistant and aluminum alloys, which have also been developed by the institute’s experts,” Kablov told Russian publication Izvestia. “We were able to print an engine with unique parameters impossible to achieve with conventional casting by using additive manufacture technology. For example, the thickness of the combustion chamber’s walls is 0.3 millimeters. Such parameters are only possible with 3D printing.”
There have been a lot of firsts for Russia in terms of 3D printing lately, and if there’s any way to quickly catch up to other countries in terms of technology, 3D printing research is a good bet. FPI deputy head Alexander Panfilov confirms that this won’t be the last collaboration between FPI and VIAM. The two organizations will continue to work together to experiment with 3D printing and help further the development of a strong additive manufacturing sector in Russia.
“After the experiment, we will begin joint work on developing additive technologies in our country to broaden the range of materials as well as developing our own unique 3D printing stations,” he said.
Discuss further over in the 3D Printed Turbine Engine for Drone forum at 3DPB.com.
[Source: Sputnik International]